Who needs parts to build a Sensebender Micro (or can solder for me)

[marceltrapman]

I have enough parts and boards lying around for about 40-50 boards (Without the Si7021).

I have not given up on them but I really am not the guy to solder them myself.

So, if anyone can do the job for me (at a fee), knows about a company that can do it for me or wants to buy the parts just let me know.

As said I should have enough for about 40-50 boards (without headers)...

Cheers,

Marcel

[elcaron]

I would suggest to get solder paste and a hot air gun (I have one of those 40$ thingys, which works fine after checking that it is not one of the units that have mains potential on the metal parts :D).
Maybe also stencils. I just had one made at jlcpcb for 7$ + shipping, it is still in the mail, though.
If you only have two left hands and no serious condition, that should make soldering them quite trivial.

[Yveaux]

@dbemowsk @elcaron I forked the drift on hot air rework stations to a new topic at https://forum.mysensors.org/topic/9246/hot-air-rework-station

[dbemowsk]

@yveaux Thanks. Didn't mean to go off on this thread. Just one of those conversations that just happened...

[Yveaux]

@dbemowsk no worries, totally recognize it ;-)

[dbemowsk]

@yveaux :+1:

[marceltrapman]

@elcaron can you let me know how that stencil is after receiving it?