💬 PogoPins
-
-
What's the smallest hole ptich that I can do pogo pins with? e.g. is 1.27mm pitch possible?
-
Yes, 1.27mm pitch should be possible with pogo pins (I have never done them myself, though).
You need to buy the smaller pogo pins (diameter 0.68mm). Some examples by other hackaers can be found e.g. at
- http://blog.spitzenpfeil.org/wordpress/projects/the-pogo-key-1-27mm-avr-isp-pogo-pin-adapter/
- http://blog.spitzenpfeil.org/wordpress/2013/11/12/the-pogo-key-1-27mm-avr-isp-adapter-take-ii/
- http://blog.spitzenpfeil.org/wordpress/2013/07/05/tiny-pcbs-vs-large-isp-headers-pogo-pins-to-the-rescue/
- https://www.tindie.com/products/ElectronutLabs/pogoprog-model-c-pogo-pin-programmer-swd-2-pack/
-
I made a simple adapter for Pro Minis, Used on it own for new boards with connection holes
If you slide on some dupont cable covers as a guide it makes it easy to program a soldered board
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login