cant get setSafeguard to work with NodeManager 1.8dev

[tomlund]

Hi

First of all, since this is my first post. Thank you all who have made this possible and so easy for us to use, especially NodeManager.

I'm currently working on a garage sensor. Everything is working except this safeguard.
I'm using a relay to open my garage door, but I only need a puls so I want to de-energize the relay as soon as possible. I tried to use;

// [108] when switching on, turns the output off after the given number of milliseconds. For latching relay controls the pulse width (default: 0)
    void setPulseWidth(int value);

It worked, but with power loss it would send one puls at startup, I tried using EEPROM, but still the same problem.

So I thought it would be possible to use it as a normal relay and then use setSafeguard to be sure to cut the signal to the relay within a short time. Nothing happens when I try to use setSafeguard.

Here is my code. If anyone can see where my mistake is, or have another solution how to make a momentary relay with nodeManager. I would be very happy

/*
* The MySensors Arduino library handles the wireless radio link and protocol
* between your home built sensors/actuators and HA controller of choice.
* The sensors forms a self healing radio network with optional repeaters. Each
* repeater and gateway builds a routing tables in EEPROM which keeps track of the
* network topology allowing messages to be routed to nodes.
*
* Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
* Copyright (C) 2013-2017 Sensnology AB
* Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
*
* Documentation: http://www.mysensors.org
* Support Forum: http://forum.mysensors.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/

/**********************************
 * MySensors node configuration
 */

// General settings
#define SKETCH_NAME "Relay"
#define SKETCH_VERSION "1.0"
#define MY_DEBUG
#define MY_NODE_ID 3

// RFM69 radio settings
#define MY_RADIO_RFM69
#define MY_RFM69_FREQUENCY RFM69_433MHZ  // Define for frequency setting. Needed if you're radio module isn't 868Mhz (868Mhz is default in lib)
#define MY_IS_RFM69HW  // Mandatory if you radio module is the high power version (RFM69HW and RFM69HCW), Comment it if it's not the case
#define MY_RFM69_NETWORKID 100  // Default is 100 in lib. Uncomment it and set your preferred network id if needed
#define MY_RFM69_NEW_DRIVER

// Advanced settings
#define MY_BAUD_RATE 9600
#define MY_SPLASH_SCREEN_DISABLED

/***********************************
 * NodeManager configuration
 */

#define NODEMANAGER_DEBUG ON
#define NODEMANAGER_INTERRUPTS ON
#define NODEMANAGER_SLEEP OFF
#define NODEMANAGER_RECEIVE ON
#define NODEMANAGER_DEBUG_VERBOSE ON
#define NODEMANAGER_POWER_MANAGER OFF
#define NODEMANAGER_CONDITIONAL_REPORT ON
#define NODEMANAGER_EEPROM OFF
#define NODEMANAGER_TIME ON
#define NODEMANAGER_RTC OFF
#define NODEMANAGER_SD OFF
#define NODEMANAGER_HOOKING OFF
#define NODEMANAGER_OTA_CONFIGURATION OFF
#define NODEMANAGER_SERIAL_INPUT OFF

// import NodeManager library (a nodeManager object will be then made available)
#include <MySensors_NodeManager.h>

/***********************************
 * Add your sensors
 */

//#include <sensors/SensorConfiguration.h>
//SensorConfiguration configuration;

#include <sensors/SensorSignal.h>
SensorSignal signal;

#include <sensors/SensorLDR.h>
SensorLDR ldr(A0);

#include <sensors/SensorRelay.h>
SensorRelay relay(6);

#include <sensors/SensorDHT22.h>
SensorDHT22 dht22(4);

#include <sensors/SensorDoor.h>
SensorDoor door(3);

/***********************************
 * Main Sketch
 */

// before
void before() {


  /***********************************
   * Configure your sensors
   */

  // report measures of every attached sensors every 10 minutes
  nodeManager.setReportIntervalMinutes(10);
  // [105] automatically turn the output off after the given number of minutes
  relay.setSafeguard(1);
  // call NodeManager before routine
  nodeManager.before();
}

// presentation
void presentation() {
  // call NodeManager presentation routine
  nodeManager.presentation();
}

// setup
void setup() {
  // call NodeManager setup routine
  nodeManager.setup();
}

// loop
void loop() {
  // call NodeManager loop routine
  nodeManager.loop();
}

#if NODEMANAGER_RECEIVE == ON
// receive
void receive(const MyMessage &message) {
  // call NodeManager receive routine
  nodeManager.receive(message);
}
#endif

#if NODEMANAGER_TIME == ON
// receiveTime
void receiveTime(unsigned long ts) {
  // call NodeManager receiveTime routine
  nodeManager.receiveTime(ts);
}
#endif

[tomlund]

It Looks like I can somewhat answer my own question.
I got Safeguard to work, even if I have set it to 1minute, it doesn't update before next

  // report measures of every attached sensors every 10 minutes
  nodeManager.setReportIntervalMinutes(10);

So it takes 10minutes, even if I have sent it to 1min. Is it supposed to be like this or is it a bug?

[user2684]

Sorry for the delay first of all, unfortunately I didn't get the notification of this thread If you are using a latching relay I'd recommend using SensorLatchingRelay1Pin or SensorLatchingRelay2Pins which should take better all the aspects of a latching relay. Then you can still use the safeguard for closing the door after a given timeframe. And yes you have to set a reporting interval even if not intuitive at all. This is because the safeguard is checked in the loop cycle which is called only if a reporting interval is set. So if you have a safeguard set to 1 minute, the report interval should be 1 minute or less. Thanks!