Relay actuator alarm siren acknowledgment
-
I have built the relay actuator using the stock sketch in examples.
I think because I am using one of my "bad" NRF24L01 radios, sometimes the signal to switch it on does not get through.
Domoticz knows that it has not switched and puts the software switch to match.
This has really got me thinking and I'm struggling to put all the pieces of the puzzle together.Questions:
Does Domoticz know if the switch request has happened or not because ACK is enabled at the Domoticz end? Child S_LIGHT/S_BINARY is set to ACK true by default. (I have not enabled ack in the sketch)
Will enabling ack in the sketch change anything?
Is there a way to keep sending the turn on request until it switches on?
If I use signing, is that another way of checking communication?
I am currently trying to learn MQTT/Node Red. Would using MQTT and QoS2 be a better way to get the signal through.I guess the aim here is to get communication between gateway and siren guaranteed.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login