Repeater node

[Terence Faul]

Hi

I have a repeater node setup along side a motion sketch.
As soon as I power it up I get the following lines constantly run on my gateway serial monitor.

It looks to me like something is wrong, I was under the impression that the repeater will only repeat messages that it receives from other nodes

TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3087 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3095 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3102 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3110 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3119 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3127 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3134 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3142 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3150 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3159 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3166 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3174 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3182 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3190 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0

3197 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3206 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3214 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3222 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3229 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3237 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3248 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3256 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3263 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3271 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3279 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3288 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3295 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0
3303 TSF:MSG:READ,4-4-0,s=1,c=1,t=16,pt=0,l=1,sg=0:0```