Understanding the Serial Monitor?
-
Hi
These are messages received at my gateway by a temp/hum/door node powered y battery.
299665 TSF:MSG:READ,1-1-0,s=1,c=1,t=0,pt=7,l=5,sg=0:20.0 299676 TSF:MSG:READ,1-1-0,s=0,c=1,t=1,pt=7,l=5,sg=0:31.0 299686 TSF:MSG:READ,1-1-0,s=3,c=1,t=16,pt=2,l=2,sg=0:1Should there not be a message formatted by ; also going to the gateway?
-
Imo all these messages are addressed to the GW. See https://www.mysensors.org/build/parser. Destination "0" stands for the gateway.
The log parser may also help to understand what is behind your other post here. The repeater node imo just acts as kind of sniffer and puts everything that's received to serial out, regardless if repeater functionality is necessay or not.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login