Dooya DC1802 sniffing and repeat



  • I really get stucked at it and need some help.
    My main goal is to control my shutters with my arduino uno. I have this dooya dc1802 remote.
    What i can achive now is that:

    And this is where i get stucket and don't know what to di whit this data. I already tried using the modified rc-switch lib with timing arrays without success, or simply put these High low changes manually lie this

    
    
    int TRANS = 10;
    
    
    void setup() {
      Serial.begin(9600);
      Serial.println("Ready...");
      pinMode(TRANS, OUTPUT);
    }
    
    void loop() {
      Serial.println("Start...");
      
      for(int i = 0; i<4; i++){
        digitalWrite(TRANS, LOW);
        delayMicroseconds(7800);      
        digitalWrite(TRANS, HIGH);
        delayMicroseconds(4660);
        digitalWrite(TRANS, LOW);    
        delayMicroseconds(1510);
        sendData();
      }
      Serial.println("Stop...");
      delay(5000);
      
      //stop
      
      
    }
    
    void sendData(){  
      for (const char* p = "0101110000110100110001111010010100111100"; *p; p++) {
        
        if (*p != '0'){
          digitalWrite(TRANS, HIGH);
          delayMicroseconds(660);
          digitalWrite(TRANS, LOW);
          delayMicroseconds(410);
        }else{
          digitalWrite(TRANS, HIGH);
          delayMicroseconds(310);
          digitalWrite(TRANS, LOW);
          delayMicroseconds(760);
        }
      }
      
    }
    

    But nothing works.



  • @peter-gonczy I'm only a noob, but is that the whole sketch? Doesn't it need to be setup so it talks to the gateway?


Log in to reply
 

Suggested Topics

  • 8
  • 1
  • 1
  • 2
  • 7
  • 90

0
Online

11.4k
Users

11.1k
Topics

112.7k
Posts