MY_RF24_IRQ_PIN on ESP8266 GW

[Sergio Rius]

Hi guys, I just updated a gateway to the latest version and I also activated IRQ for the radio.
I wired the irq to the pin marked D4 on the NodeMcu v1 and set: #define MY_RF24_IRQ_PIN (2)
Due to the weird mapping on this board I don't know if its correctly wired. The gw seems to work.
Do you guys knows how to know if the feature is correctly working? Thanks.

[mfalkvidd]

@sergio-rius if the gateway can send and receive messages, the irq is working.

[tekka]

@mfalkvidd said in MY_RF24_IRQ_PIN on ESP8266 GW:

@sergio-rius if the gateway can send and receive messages, the irq is working.

MY_RF24_IRQ_PIN is currently only used for the RX_QUEUE_BUFFER feature, and unfortunately, ESP8266 does not support interrupt usage for SPI. See comments here: https://github.com/mysensors/MySensors/blob/development/hal/transport/RF24/driver/RF24.cpp#L525

[Sergio Rius]

So there's so limited functionality on esp. I think you can guess where I was going.

So I thought it could be some trouble because I saw some strange behavior, sometimes the start stuck, and keep flashing the led. I saw that d4 controls the inboard led, but as the gw worked after a reset and was so late I left for the day.
I may swap that pin, but I don't know what is available and it's internal number.

[Yveaux]

@sergio-rius I'm surprised it even compiles for esp8266, see my posts in https://github.com/mysensors/MySensors/issues/1128
Could be that the arduino port for esp8266 had evolved, but that requires a deeper look.

[tekka]

@yveaux Defining MY_RF24_IRQ_PIN does not enable the RX queue feature per se. Therefore it compiles ;)

[Sergio Rius]

@mfalkvidd yes, I saw those posts. And there are changes in both the esp firmware and the Arduino core. I had to re-implement the ArduinoOta, for example. And it still doesn't work. But compiles.

@tekka said in MY_RF24_IRQ_PIN on ESP8266 GW:

@yveaux Defining MY_RF24_IRQ_PIN does not enable the RX queue feature per se. Therefore it compiles ;)

That's the impression I had, that hadn't any effect. That was the reason I asked. Does actually have any functionality on esp?

[Yveaux]

@tekka said in MY_RF24_IRQ_PIN on ESP8266 GW:

Therefore it compiles

True, and next it doesn't use it? ;-)

[Sergio Rius]

@yveaux said in MY_RF24_IRQ_PIN on ESP8266 GW:

True, and next it doesn't use it? ;-)

This could be reformulated as an affirmative sentence.
I cut the bridge wiring and continued working as nothing happened.