How to work with the C02 Sensor MH-Z19B
-
Hi all,
I have a MH-Z19B that I would like to get talking to my Pi B+, although the pins on the GPIO needed for it are already taken up by a RaspBee module.
Are there any other options? Could a JST to USB work?
-
Welcome to the MySensors forum. MySensors is a library you can use to create a wireless mesh network of sensors which communicate with a central point, such as your Raspberry Pi.
You could attach an Arduino Nano to USB and talk to it via Serial.
You could create a MySensors network, which you could also communicate to via an arduino+radio on your USB port. Then you could attach countless sensors. There is a ready-to-go sketch for the MH-Z19B.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login