Neighbor kicking me off my own mysensor network?



  • As I am still new to mysensors I'm still testing. And I have an mysensors mqtt gateway and 1 node that sends a counter every second. I let it run and after a few minutes it stopped. Looking at the serial log on the gateway I see nothing strange. So I reset the node and watched the node's output. After a few minutes I saw this:

    155152 SGN:SKP:MSG CMD=3,TYPE=16
    155221 TSF:MSG:SEND,8-8-0-0,s=1,c=3,t=16,pt=0,l=0,sg=1,ft=0,st=OK:
    155227 SGN:SGN:NCE REQ,TO=0
    155465 TSF:MSG:READ,209-71-52,s=165,c=2,t=50,pt=6,l=25,sg=1:9978A2FCDC377E7B58EE3EAE3CFE73C9691DF39531837A3FF0000000
    155475 !TSF:MSG:REL MSG,NREP
    155675 TSF:MSG:READ,0-0-8,s=255,c=3,t=17,pt=6,l=25,sg=1:<NONCE>
    155680 SGN:SKP:MSG CMD=3,TYPE=17
    155683 SGN:NCE:FROM=0
    155685 SGN:BND:NONCE=C9C51E6F68377E7B58EE3EAE3CFE73C9691DF39531837A3FF0AAAAAAAAAAAAAA
    155694 SGN:BND:HMAC=C4012E67EE6AF3CAB7FFA958EBA46DF1D2DEC47B2C75C489925A34683F4B8D00
    155701 SGN:SGN:SGN
    155769 TSF:MSG:SEND,8-8-0-0,s=1,c=1,t=16,pt=4,l=4,sg=1,ft=0,st=OK:92
    156775 !MCO:SND:NODE NOT REG
    157778 !MCO:SND:NODE NOT REG
    

    Putting that in the parser it looks like another node (not mine) sent a msg which caused it to disconnect from my gateway.

    So I changed my network id and then got a similar result:

    421032 SGN:SKP:MSG CMD=3,TYPE=16
    421101 TSF:MSG:SEND,8-8-0-0,s=2,c=3,t=16,pt=0,l=0,sg=1,ft=0,st=OK:
    421107 SGN:SGN:NCE REQ,TO=0
    421331 TSF:MSG:READ,156-176-216,s=108,c=1,t=29,pt=6,l=25,sg=1:75C28949816EF1D6D27FD99A4D5303D67DA46283A7DE8171F5000000
    421342 !TSF:MSG:PVER,3!=2
    421548 TSF:MSG:READ,0-0-8,s=255,c=3,t=17,pt=6,l=25,sg=1:<NONCE>
    421554 SGN:SKP:MSG CMD=3,TYPE=17
    421557 SGN:NCE:FROM=0
    421559 SGN:BND:NONCE=F3E9E79AB06EF1D6D27FD99A4D5303D67DA46283A7DE8171F5AAAAAAAAAAAAAA
    421567 SGN:BND:HMAC=6AC3B09CFFC889990700C30211E3B02F63CEE0B2D5B401CDB85E51FB055B985C
    421575 SGN:SGN:SGN
    421642 TSF:MSG:SEND,8-8-0-0,s=2,c=1,t=3,pt=4,l=4,sg=1,ft=0,st=OK:250
    422648 !MCO:SND:NODE NOT REG
    423651 !MCO:SND:NODE NOT REG
    

    So I guess my question is this a neighboring node that I'm picking up and can I force my node to only communicate with my gateway?

    For reference I did enable MY_SECURITY_SIMPLE_PASSWD so it should have been encrypted and signed.



  • Or if there is at least a way to check if there is no network connection to force a reconnect. (rfm69)


 

193
Online

8.7k
Users

9.5k
Topics

99.5k
Posts