Just curious! Has anybody done any implementations of MySensors Controller on TheThingBox, especially the people who are interested in Raspi controllers!?! TheThingbox looks very promising and so does Node-Red.
@jkandasa
Thank you for the update. I will use this controller in production in few days. Eactly what I want. For non-msensors devices I Will use node-red as glue !
Hi. It's long time .. but standard function is : gw.processRadioMessage();
and I make changes in source code in MyGateway.cpp to this :
char MyGateway::processRadioMessage() {
char isMessage=0;
if (process()) {
// A new message was received from one of the sensors
isMessage=1;
MyMessage message = getLastMessage();
if (mGetCommand(message) == C_PRESENTATION && inclusionMode) {
rxBlink(3);
} else {
rxBlink(1);
}
// Pass along the message from sensors to serial line
serial(message);
}
checkButtonTriggeredInclusion();
checkInclusionFinished();
return isMessage;
}
But in new library is not file MyGateway.cpp .. then I don't now ..
using is :
if (gw.processRadioMessage()==1) {..}
regards..
there is possible make easy gateway .. controler .. to control only light for example.. then we don't need external controller .. etc..
Hi John,
appLog.txt
I also tried using datatype string but it doesen't work. Meanwhile I have studies the log files more detailed and found the following behavior:
when defining the device skeletal and when updating the derived device (first approx. 25 lines in the log file V_STATUS is declared as string with values 51 resp. 52 as specified in the web interface. The entity is "Modul 433 MHz".
Later on, when using the toggle switch in the web interface the value has changed in the decription in the log file (see line 164 or 185) value has been changed to on/off. With this definition it seem that the mysensors-Plugin is feeded has been changed from the specified values.
My conclusion is that the change is taking place somewhere outside the mysensors-plugin.
By the way, if I change the type to string do I have to use quotation marks in the web interface?
Thanks a lot for your support.
Martin
