Really interesting, maybe I could build something cool around the Arduino HeatpumpIR (https://github.com/ToniA/arduino-heatpumpir) library I've been building. Right now I'm integrating it with Domoticz (http://www.domoticz.com/forum/viewtopic.php?f=34&t=7179#p69647).
I'm an ex-Microsoft employee from Finland (resigned about a month ago).
In deep Sleep the cunsumption is below 19µA, but i have to send with PA_MAX. On some Windows the open/close frequency is verry high, so the battery is to fast emty.
The CR2032 is good, but i want more "lifetime"
@gohan said in Arduino Pro Mini Shield for RFM69(H)W:
If I remeber right that pin is used as input so the RFM69 is not receiving any 5v signal. In addition there are people claming they have the RFM69 module working on 5v on data pins and 3.3v on vcc, but I hardly suggest to do it.
thank you just what i thought .
about direct 5v on data...well... i seen a big red sign saying n :DONT do it! lol
Level converters are so cheap...that i ordered 5 or 10 thoguether with rfm69 board.
sorry about hijack this topic, i though i was on general discussion
I see a lot of "!TSF" and "NACK" which seems to be radio communication problems.
That's MySensors related and can be related to many things, from soldering problem to power / capacitor issues.
In MY_DEBUG mode you should see your temp/hum printed on serial every ~15s so there is something wrong there, either wiring or a code issue.
Ty with the example included with the library "i2c_SI7021.h", without any MySensors related stuff, to see if your sensor is detected. You should see temp/hum on the serial.
@GLAB No worries, was in a similar situation.. My perspective was on what the Node could be made to provide, not what could be done within Domoticz to address the requirement - eg Had heard of Dummy counters but had no experience nor understood their purpose, nor had ever used scripts.
I had been sending a logical ON/OFF as well as a cumulative total from the Node and hit the same hair-pulling scenario as yourself.
Now only the ON/OFF is sent and the short script makes the transposition within Domoticz to a dummy meter (I think kWhr) using the internal clock in Domoticz.
Have fun
