GPIO 7 and 8 go high when gateway start on raspberry pi
-
I am using raspberry pi 3 as gateway. I found if start mysgw, GPIO 7 and 8 will be in High output state. GPIO 8 is connected to NF24 CS PIN and I have a led on GPIO 7 and I don‘t want the led light all the time. Please help how to make GPIO 7 as GPIO and be to be controlled by mysgw.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login