domoticz motion(type)sensors don't show battery level

[Tmaster]

hello. i build an motion sensors that works great but if i select sensor type on domoticz like "motion sensor", the battery level from "devices" disappear. That only happens on "motion sensor type", if i select other like on/off type ,the level appears but than i can't use the "disable after x seconds" feature present only on motion sensor type.
any one have this problem? i can't find if its an domoticz bug or mysensors , or what what happens
code is bellow but i think it's ok because if i select other type of sensor ,on domoticz, battery status work good. .thanks.

void setup()
{
	pinMode(DI_SENSOR1, INPUT);
	//pinMode(DI_SENSOR2, INPUT); // sets the motion sensor digital pin as input
  analogReference(INTERNAL);
}

void presentation()
{
	// Send the sketch version information to the gateway and Controller
	sendSketchInfo("Motion Sensor", "1.0");

	// Register all sensors to gw (they will be created as child devices)
	present(CHILD_ID, S_MOTION);
}
void loop()
{
  int sensorValue = analogRead(BATTERY_SENSE_PIN);
 float vBat  = static_cast<float>(sensorValue * (8.2/1023));
  
  #ifdef MY_DEBUG
    Serial.print("A0: ");
    Serial.println(sensorValue);
    Serial.print("Battery Voltage: ");
    Serial.println(vBat);
  #endif
    delay(500);
    int batteryPcnt =  static_cast<int>(((vBat-6)/(8.4-6))*100.);
    delay(500);

  // ((1e3+150)/150)*1.1 = Vmax = 8.43 Volts
   // 8.43/1023 = Volts per bit = ~0.00804

  #ifdef MY_DEBUG
       Serial.print("Battery percent: ");
    Serial.print(batteryPcnt);
    Serial.println(" %");
  #endif
   if (oldBatteryPcnt != batteryPcnt)  {
        // Power up radio after sleep
        
        sendBatteryLevel(batteryPcnt);
        oldBatteryPcnt = batteryPcnt;
        }

 //motion 

    bool tripped = digitalRead(DI_SENSOR1) == HIGH;


      Serial.println(tripped);
     send(msg.set(tripped?"1":"0"));

    sleep(digitalPinToInterrupt(DI_SENSOR1), RISING, 0);
}

[nagelc]

I have 2 motion sensors on Domoticz, and they both show the battery level.
Maybe it is because your level doesn't get sent often enough. I do send a battery level every 30 minutes even if the value hasn't changed (which is way too often. But, I am still experimenting with these nodes.)
Or, maybe it has to do with the Domoticz version. My Domoticz version is 2020.2

[Tmaster]

My version it's V4.11207 .I can't upgrade more without upgrade Os from "strecht"to new raspbian Os. Shouldn't be the sensor update frequency because if i go to domoticz now and just change sensor type to" on/off switch" ,battery level just appears there on debices.
I think that i have to upgrade everyting...Os and domoticz but its a pain,because i have to pair zwave devices from shutters again...and probably new bugs appear.... My thought is;linux that work...don't touch

[nagelc]

I know what you mean.
I have several Pi's. I upgraded them from Stretch to Buster using instructions found here https://pimylifeup.com/upgrade-raspbian-stretch-to-raspbian-buster/

I only got the courage to ugrade my domoticz server after having upgraded 3 others first with no problems.
But it did work.

[Tmaster]

On a new card i updated OS to Raspian Buster and installed latest domoticz V 2.2020. BUT the problem still the same . no battery value present soon as this sensor report a new "data" AND it's as motion sensor and not as any other type of sensor. If it works to others i really don't understand what happens...