How to change Radio ID on Raspberry Pi Gateway with NRF24

[jacmika]

Hi,
Does anybody know how to change the Radio ID on Raspberry Pi Gateway with NRF24 radio?
Equivalent to MY_NRF5_ESB_BASE_RADIO_ID for NRF5 nodes.
Thanks

[mfalkvidd]

Welcome to the forum @jacmika !

You can add options to the configure command like this: --extra-cxxflags="-DMY_RX_MESSAGE_BUFFER_SIZE=\(32\)

See also the section called ”Advanced” at https://www.mysensors.org/build/raspberry

[jacmika]

Thank you Mikael,

Would it be mean that for default Radio ID command is (including closing ")?
--extra-cxxflags="-MY_RF24_BASE_RADIO_ID=(0x00,0xFC,0xE1,0xA8,0xA8)"

[mfalkvidd]

@jacmika it would need shell escaping and it is missing the initial D. I would try something like
--extra-cxxflags="-DMY_RF24_BASE_RADIO_ID=0x00,0xFC,0xE1,0xA8,0xA8

If I recall correctly, the output of make will show which defines are activated, and what values they have. That's what I usually use to check if I got it right.