SP32 GW and RFM69HCW radio pinout

[DenisJ]

Hi there all,
I'm newbie in the world of MySensors and I try to make the first gateway (with MQTT client)

I so in the page here the pin mapping of the ESP8266
but I can't find the pin connection for the ESP32.

Then I find in this page a table with the pin for the ESP32 but I can't understand some pin.

* | IO   | RF24 | RFM69 | RFM95 |
* |------|------|-------|-------|
* | MOSI | 23   | 23    | 23    |
* | MISO | 19   | 19    | 19    |
* | SCK  | 18   | 18    | 18    |
* | CSN  | 5    | 5     | 5     |
* | CE   | 17   | -     | -     |
* | RST  | -    | 17    | 17    |
* | IRQ  | 16*  | 16    | 16    |
* * = optional

First of all this number is refer to the GPIO number of ESP32 ?
Then... I can't see the CSN and the IRQ on my RFM69HCW radio.
Here is a page that have the pinout of the RFM69HCW module.

I try some connections but I have an error like :

105 TSF:LRT:OK
148 TSM:INIT
188 TSF:WUR:MS=0
235 !TSM:INIT:TSP FAIL
283 TSM:FAIL:CNT=1
329 TSM:FAIL:DIS
374 TSF:TDI:TSL

Anybody can help me please ?

Thanks all in advance
Denis

[alexelite]

@DenisJ CSN is NSS on radio module, and IRQ is DIO0

[DenisJ]

It's work
Thanks a lot