Sensor reboot with Ebyte NRF



  • Hi everyone,
    I would like more range for my garage sensor. I have 20meters but 2 wall beetween gateway/sensor.
    So, I buy nrf 27dbm from ebyte to change low cost NRF and I power sensor by 2xAA + 4.7uF.

    But something strange, If I boot just with AA, the sensor reboot. I have 3.2V out battery.
    If I plug with FTDI no problem on start.. .
    I use Pro mini 3V 8Mhz without volage regulator.
    Any idee ?
    Thanks you 🙂



  • I try with a lab power, It's work now.. What can I do for power with battery ?



  • @tutur19 Either use a battery with a higher mAH rating or put 2 or 3 batteries in parallel to give more power.



  • You could try with a larger capacitor, close to the radio module



  • Thanks to all. It's very strange. I try to test NFR with Uno and PCB regulator (3V3 + capacitor) , It's work with old NRF but when I switch old NRF to Ebyte, it's not working... But I test Ebyte antenna to my gateway and it's working, so it's not broken


Log in to reply
 

Suggested Topics

  • 7
  • 6
  • 13
  • 4
  • 5
  • 20
  • 1
  • 1

124
Online

10.6k
Users

10.8k
Topics

111.0k
Posts