ESP32 Wired (no WiFi)
-
Generally, the problem is solved. All you need to do is initialize the PHY for ESP32 using the ETH.h library from the Espresiff package. Then it's a matter of eliminating the Wi-Fi initialization that is automatically started for ESP32. Interestingly, you can use two IP addresses at the same time, one from the PHY and the other from Wi-Fi - of course, Mysensors responds to both. If anyone is interested in the solution - I invite you to talk. I started Mysensors on the PHY of the Kicony KC868-A16 board and it works great.
-
It seems that using an Ethernet PHY (like LAN8720) with the ESP32 in a MySensors setup requires a bit of extra configuration, including initializing the PHY using the ETH.h library and disabling the default Wi-Fi initialization. Interestingly, this setup allows for dual IP addresses, with one for the Ethernet connection and another for Wi-Fi, which can be useful in certain applications.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login