My first multisensor daughter board
-
just some ideas, but it's so fast with SolidW :smile:
Do you want some salt??
I need a 3d printer, aaargh :satisfied:
-
@Anticimex : it seems very interesting. Something I was searching for.. I have found some others links different, but not easier to implement as your link. A low power PIR could be great, this is something missing in our battery powered sensors toolbox. I will look at this asap. Thx for share :smiley:
-
@Anticimex : it seems very interesting. Something I was searching for.. I have found some others links different, but not easier to implement as your link. A low power PIR could be great, this is something missing in our battery powered sensors toolbox. I will look at this asap. Thx for share :smiley:
-
@Anticimex: yes, good idea. I am still waiting my D203s pir sensors. asa I get them, I try your link on breadboard and give you some news. thx. see you soon :smiley:
-
@Anticimex: yes, good idea. I am still waiting my D203s pir sensors. asa I get them, I try your link on breadboard and give you some news. thx. see you soon :smiley:
-
@Dylano: thx for interest :). I am comparing few pcbas, waiting my reflow oven much for small batch and boost prototyping than selling. I would prefer to have a good quotation or deal like limited partnership maybe...
In fact I have other boards in progress maybe you would prefer..
This one is based on mytinycamel, a board I made for ultra low power <1uA + booster, and for the exercise of power sequence&mosfets.... but it is better for telemetry application than PIR motion sensor.
Plus, here it needs a shield which add a little bit thickness, for indoor, I know it's just few mm...So I made this one, better for pir (in progress, I will post pics) : http://forum.mysensors.org/topic/2951/my-mysx-multisensors-board
but mytinycamel is still actual because modular and enough cheap too, it works but I redraw it to add more connectors as i don't need pir on this one. rfm69 or nrf, ldo or booster+ ultra low power modee, eprom, power on/off sensors radios 2.4x5cm blabla...looks like this now with 3 connectors for common sensors.
Note: I have not yet this rev, this is a part of my week order ;) (with a dhl in my face please, as I am not so patient ...)So for the moment nothing to sell, but in future..I would be glad :)
-
@alexsh1
veml6070 works nice.
that's a while i've done this ulpnode board. finally i've done my coincell multisensors for indoor.
And now, for lot of sensors etc i use more powerful mcu.
That said i have a weather extension board with lot of sensors including the veml6070. will try to release when i'have time ;)
