Skip to content
  • MySensors
  • OpenHardware.io
  • Categories
  • Recent
  • Tags
  • Popular
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Default (No Skin)
  • No Skin
Collapse
Brand Logo
  1. Home
  2. Hardware
  3. Using mysensors for alarm build?

Using mysensors for alarm build?

Scheduled Pinned Locked Moved Hardware
17 Posts 9 Posters 10.5k Views 8 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • sundberg84S Offline
    sundberg84S Offline
    sundberg84
    Hardware Contributor
    wrote on last edited by
    #7

    Hi!

    I have set up my home-security system where MySensors is included.
    I run two raspberry Pi - one with Domoticz + MySensors GW and one as FTP server.

    • In domoticz i use the security panel which is controlled with our cell-phones (location services)
    • I have motion detectors from MySensors reporting movement.
    • If my house is armed Domoticz and motion is detected i get a notification, siren on and so forth...
    • Siren and lights are MySensored.
    • I also run three IP cams reportion motion and adding pics/video to my ftp.
    • I hope these can be used to detect motion in Domoticz in the future.

    Its a fun project - but not so safe as a pro system.
    For example i dont have battery backup if power fails.

    Controller: Proxmox VM - Home Assistant
    MySensors GW: Arduino Uno - W5100 Ethernet, Gw Shield Nrf24l01+ 2,4Ghz
    MySensors GW: Arduino Uno - Gw Shield RFM69, 433mhz
    RFLink GW - Arduino Mega + RFLink Shield, 433mhz

    lvidal07L 1 Reply Last reply
    1
    • sundberg84S sundberg84

      Hi!

      I have set up my home-security system where MySensors is included.
      I run two raspberry Pi - one with Domoticz + MySensors GW and one as FTP server.

      • In domoticz i use the security panel which is controlled with our cell-phones (location services)
      • I have motion detectors from MySensors reporting movement.
      • If my house is armed Domoticz and motion is detected i get a notification, siren on and so forth...
      • Siren and lights are MySensored.
      • I also run three IP cams reportion motion and adding pics/video to my ftp.
      • I hope these can be used to detect motion in Domoticz in the future.

      Its a fun project - but not so safe as a pro system.
      For example i dont have battery backup if power fails.

      lvidal07L Offline
      lvidal07L Offline
      lvidal07
      wrote on last edited by
      #8

      @sundberg84 What did hoh use to set up your siren? I'm working on my own home security project as well.

      1 Reply Last reply
      0
      • sundberg84S Offline
        sundberg84S Offline
        sundberg84
        Hardware Contributor
        wrote on last edited by
        #9

        @lvidal07 At the moment (5 months later) im using RFLink and 433mhz firealarms.
        They go both ways - fire => update on Domoticz and push notise. IntruderAlarm => starts firealarm.

        But at that point I worked on something like this from petewill: https://www.youtube.com/watch?v=mNsar_e8IsI&index=9&list=PLGzVpwPAKnPZ6F4fY8AevfVmcHdJFpKma

        Controller: Proxmox VM - Home Assistant
        MySensors GW: Arduino Uno - W5100 Ethernet, Gw Shield Nrf24l01+ 2,4Ghz
        MySensors GW: Arduino Uno - Gw Shield RFM69, 433mhz
        RFLink GW - Arduino Mega + RFLink Shield, 433mhz

        lvidal07L 1 Reply Last reply
        0
        • sundberg84S sundberg84

          @lvidal07 At the moment (5 months later) im using RFLink and 433mhz firealarms.
          They go both ways - fire => update on Domoticz and push notise. IntruderAlarm => starts firealarm.

          But at that point I worked on something like this from petewill: https://www.youtube.com/watch?v=mNsar_e8IsI&index=9&list=PLGzVpwPAKnPZ6F4fY8AevfVmcHdJFpKma

          lvidal07L Offline
          lvidal07L Offline
          lvidal07
          wrote on last edited by
          #10

          @sundberg84 Thanks for the info. Any reason for the switch?

          1 Reply Last reply
          0
          • sundberg84S Offline
            sundberg84S Offline
            sundberg84
            Hardware Contributor
            wrote on last edited by
            #11

            @lvidal07 I extended my HA to both MySensors and RFLink/433mhz. There is a manufacturer of firealarms which are good and cheap using 433mhz,

            Controller: Proxmox VM - Home Assistant
            MySensors GW: Arduino Uno - W5100 Ethernet, Gw Shield Nrf24l01+ 2,4Ghz
            MySensors GW: Arduino Uno - Gw Shield RFM69, 433mhz
            RFLink GW - Arduino Mega + RFLink Shield, 433mhz

            fetsF 1 Reply Last reply
            0
            • sundberg84S sundberg84

              @lvidal07 I extended my HA to both MySensors and RFLink/433mhz. There is a manufacturer of firealarms which are good and cheap using 433mhz,

              fetsF Offline
              fetsF Offline
              fets
              wrote on last edited by
              #12

              @sundberg84 said:

              There is a manufacturer of firealarms which are good and cheap using 433mhz,

              Care to give a link ? :innocent:

              1 Reply Last reply
              0
              • sundberg84S Offline
                sundberg84S Offline
                sundberg84
                Hardware Contributor
                wrote on last edited by sundberg84
                #13

                www.nexa.se

                Controller: Proxmox VM - Home Assistant
                MySensors GW: Arduino Uno - W5100 Ethernet, Gw Shield Nrf24l01+ 2,4Ghz
                MySensors GW: Arduino Uno - Gw Shield RFM69, 433mhz
                RFLink GW - Arduino Mega + RFLink Shield, 433mhz

                1 Reply Last reply
                0
                • BartEB Offline
                  BartEB Offline
                  BartE
                  Contest Winner
                  wrote on last edited by
                  #14

                  Hi, i also did build a rflink to MySensors gateway on which all interesting 433Mhz message are translated to MySensors message.

                  e.g. my RFLINK<->MYS presents my weather station (LaCross WS2300) data, klik-aan-klik-uit RC and my Flamingo firealarms

                  1 Reply Last reply
                  0
                  • fetsF Offline
                    fetsF Offline
                    fets
                    wrote on last edited by
                    #15

                    thanks both of you

                    1 Reply Last reply
                    0
                    • sundberg84S Offline
                      sundberg84S Offline
                      sundberg84
                      Hardware Contributor
                      wrote on last edited by
                      #16

                      @BartE Haha, that flamingo alarm looks exactly like my Nexa alarm... :)

                      Controller: Proxmox VM - Home Assistant
                      MySensors GW: Arduino Uno - W5100 Ethernet, Gw Shield Nrf24l01+ 2,4Ghz
                      MySensors GW: Arduino Uno - Gw Shield RFM69, 433mhz
                      RFLink GW - Arduino Mega + RFLink Shield, 433mhz

                      1 Reply Last reply
                      0
                      • lvidal07L Offline
                        lvidal07L Offline
                        lvidal07
                        wrote on last edited by
                        #17

                        Thanks as well. I decided to go with this alarm, http://www.ebay.com/itm/like/252094388277?dest=http%3A%2F%2Fwww.ebay.com%2Fitm%2F252094388277, probably more than I needed to pay, but I liked the idea of a strobe alarm.

                        1 Reply Last reply
                        0
                        Reply
                        • Reply as topic
                        Log in to reply
                        • Oldest to Newest
                        • Newest to Oldest
                        • Most Votes


                        26

                        Online

                        11.7k

                        Users

                        11.2k

                        Topics

                        113.1k

                        Posts


                        Copyright 2025 TBD   |   Forum Guidelines   |   Privacy Policy   |   Terms of Service
                        • Login

                        • Don't have an account? Register

                        • Login or register to search.
                        • First post
                          Last post
                        0
                        • MySensors
                        • OpenHardware.io
                        • Categories
                        • Recent
                        • Tags
                        • Popular