Monitor a irrigation status
-
Hi
I have a hunter irrigation controller. I was thinking of building a binaryswitch as per the example with four switches to monitor the status of the valves. ie on/off.
The valves operate on 24v would this be posible without damaging the promini
-
Yes - but you have to protect the arduino from that high voltage. Best way is with a small optocoupler chip (I use EL817 chips which you can get for practically nothing). There is an excellent explanation in the first answer on this post on stackExchange. You may have to adjust the resistors because of the higher voltage. I've included the schematic below (it's a good idea to read the answer though).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login