Not getting Node ID assigned
FHEM
11
Posts
3
Posters
5.7k
Views
2
Watching
-
I have an 8MHz 3.3V Pro Mini Arduino with a NRF24l01 connected to a Olimex A10 (Debian Lime). I have set the Serial gateway to run at 57600 and also created a gateway in Fhem.
/dev/ttyUSB0@57600 with auotocreate set to 1 and requestAck set to 1.
I ran all the Fhem updates.
I have a simple Battery Monitor Node with no Sensor IDs just the battery level. But I cannot see the battery level in the log.
I only get this message:
2016.02.11 10:51:53 3: MYSENSORS: ignoring internal-msg from unknown radioId 254, childId 255 for I_BATTERY_LEVEL
Isn't Fhem supposed to Auto Add Nodes? What am I doing wrong? -
I still can't work this out. If i turn on inclusion-mode on the serial gateway I always get NODE ID 254 assigned. And if I add a second node it shares the same node id and I end up with attributes for many sensor type all in the same node. It lways gets named MYSENSOR_254. Pulling my hair out for 5 days now... can anyone help?
-
Use MySensors v1.4.2 in your gateway? I only use Ethernet (W5100) gateway so I can't test, but MySensors v1.5 and later isn't supported by Fhem yet AFAIK.
Tried static Node IDs?
Post your fhem.cfg, or at least the relevant parts.
-
Use MySensors v1.4.2 in your gateway? I only use Ethernet (W5100) gateway so I can't test, but MySensors v1.5 and later isn't supported by Fhem yet AFAIK.
Tried static Node IDs?
Post your fhem.cfg, or at least the relevant parts.
Aha! I thought it might have been a gateway issue. Yes of course I am running ver 1.5 so I will try v1.4.2 and report back how it goes!
In the meantime here are my configs.
I have loaded the UV node information into Fhem but it still will not recognize the node.Here is my Fhem config.
attr global userattr cmdIcon devStateIcon devStateStyle icon sortby webCmd widgetOverride attr global autoload_undefined_devices 1 attr global logfile ./log/fhem-%Y-%m.log attr global modpath . attr global motd SecurityCheck:\ \ WEB,WEBphone,WEBtablet has no associated allowed device with basicAuth.\ telnetPort has no associated allowed device with password/globalpassword.\ \ Restart FHEM for a new check if the problem is fixed,\ or set the global attribute motd to none to supress this message.\ attr global statefile ./log/fhem.save attr global updateInBackground 1 attr global verbose 3 define telnetPort telnet 7072 global define WEB FHEMWEB 8083 global define WEBphone FHEMWEB 8084 global attr WEBphone stylesheetPrefix smallscreen define WEBtablet FHEMWEB 8085 global attr WEBtablet stylesheetPrefix touchpad # Fake FileLog entry, to access the fhem log from FHEMWEB define Logfile FileLog ./log/fhem-%Y-%m.log fakelog define autocreate autocreate attr autocreate filelog ./log/%NAME-%Y.log define eventTypes eventTypes ./log/eventTypes.txt # Disable this to avoid looking for new USB devices on startup define initialUsbCheck notify global:INITIALIZED usb create define gateway MYSENSORS /dev/ttyUSB0@57600 attr gateway autocreate 1 attr gateway first-sensorid 10 attr gateway icon it_wireless_dcf77 attr gateway stateFormat connection define UVSensor MYSENSORS_DEVICE 10 attr UVSensor IODev gateway attr UVSensor mapReading_uv 0 uv attr UVSensor mode node attr UVSensor version 1.2And a standard UV mysensor Arduino code (no mods).
/** * The MySensors Arduino library handles the wireless radio link and protocol * between your home built sensors/actuators and HA controller of choice. * The sensors forms a self healing radio network with optional repeaters. Each * repeater and gateway builds a routing tables in EEPROM which keeps track of the * network topology allowing messages to be routed to nodes. * * Created by Henrik Ekblad <henrik.ekblad@mysensors.org> * Copyright (C) 2013-2015 Sensnology AB * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors * * Documentation: http://www.mysensors.org * Support Forum: http://forum.mysensors.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * ******************************* * * REVISION HISTORY * Version 1.0 - epierre * Contribution: bulldoglowell, gizmocuz * * DESCRIPTION * Arduino UVM-30A * Index table taken from: http://www.elecrow.com/sensors-c-111/environment-c-111_112 /uv-sensor-moduleuvm30a-p-716.html * Because this table is pretty lineair, we can calculate a UVI with one decimal * * Connect sensor: * * + >>> 5V * - >>> GND * out >>> A0 * * License: Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0) */ #include <SPI.h> #include <MySensor.h> #include <MySensor.h> #include <SPI.h> #define UV_SENSOR_ANALOG_PIN 0 #define CHILD_ID_UV 0 unsigned long SLEEP_TIME = 30*1000; // Sleep time between reads (in milliseconds) MySensor gw; MyMessage uvMsg(CHILD_ID_UV, V_UV); unsigned long lastSend =0; float uvIndex; float lastUV = -1; uint16_t uvIndexValue [12] = { 50, 227, 318, 408, 503, 606, 696, 795, 881, 976, 1079, 1170}; void setup() { gw.begin(); // Send the sketch version information to the gateway and Controller gw.sendSketchInfo("UV Sensor", "1.2"); // Register all sensors to gateway (they will be created as child devices) gw.present(CHILD_ID_UV, S_UV); } void loop() { unsigned long currentTime = millis(); uint16_t uv = analogRead(UV_SENSOR_ANALOG_PIN);// Get UV value if (uv>1170) uv=1170; //Serial.print("UV Analog reading: "); //Serial.println(uv); int i; for (i = 0; i < 12; i++) { if (uv <= uvIndexValue[i]) { uvIndex = i; break; } } //calculate 1 decimal if possible if (i>0) { float vRange=uvIndexValue[i]-uvIndexValue[i-1]; float vCalc=uv-uvIndexValue[i-1]; uvIndex+=(1.0/vRange)*vCalc-1.0; } //Serial.print("UVI: "); //Serial.println(uvIndex,2); //Send value to gateway if changed, or at least every 5 minutes if ((uvIndex != lastUV)||(currentTime-lastSend >= 5UL*60UL*1000UL)) { lastSend=currentTime; gw.send(uvMsg.set(uvIndex,2)); lastUV = uvIndex; } gw.sleep(SLEEP_TIME);}
-
Aha! I thought it might have been a gateway issue. Yes of course I am running ver 1.5 so I will try v1.4.2 and report back how it goes!
In the meantime here are my configs.
I have loaded the UV node information into Fhem but it still will not recognize the node.Here is my Fhem config.
attr global userattr cmdIcon devStateIcon devStateStyle icon sortby webCmd widgetOverride attr global autoload_undefined_devices 1 attr global logfile ./log/fhem-%Y-%m.log attr global modpath . attr global motd SecurityCheck:\ \ WEB,WEBphone,WEBtablet has no associated allowed device with basicAuth.\ telnetPort has no associated allowed device with password/globalpassword.\ \ Restart FHEM for a new check if the problem is fixed,\ or set the global attribute motd to none to supress this message.\ attr global statefile ./log/fhem.save attr global updateInBackground 1 attr global verbose 3 define telnetPort telnet 7072 global define WEB FHEMWEB 8083 global define WEBphone FHEMWEB 8084 global attr WEBphone stylesheetPrefix smallscreen define WEBtablet FHEMWEB 8085 global attr WEBtablet stylesheetPrefix touchpad # Fake FileLog entry, to access the fhem log from FHEMWEB define Logfile FileLog ./log/fhem-%Y-%m.log fakelog define autocreate autocreate attr autocreate filelog ./log/%NAME-%Y.log define eventTypes eventTypes ./log/eventTypes.txt # Disable this to avoid looking for new USB devices on startup define initialUsbCheck notify global:INITIALIZED usb create define gateway MYSENSORS /dev/ttyUSB0@57600 attr gateway autocreate 1 attr gateway first-sensorid 10 attr gateway icon it_wireless_dcf77 attr gateway stateFormat connection define UVSensor MYSENSORS_DEVICE 10 attr UVSensor IODev gateway attr UVSensor mapReading_uv 0 uv attr UVSensor mode node attr UVSensor version 1.2And a standard UV mysensor Arduino code (no mods).
/** * The MySensors Arduino library handles the wireless radio link and protocol * between your home built sensors/actuators and HA controller of choice. * The sensors forms a self healing radio network with optional repeaters. Each * repeater and gateway builds a routing tables in EEPROM which keeps track of the * network topology allowing messages to be routed to nodes. * * Created by Henrik Ekblad <henrik.ekblad@mysensors.org> * Copyright (C) 2013-2015 Sensnology AB * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors * * Documentation: http://www.mysensors.org * Support Forum: http://forum.mysensors.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * ******************************* * * REVISION HISTORY * Version 1.0 - epierre * Contribution: bulldoglowell, gizmocuz * * DESCRIPTION * Arduino UVM-30A * Index table taken from: http://www.elecrow.com/sensors-c-111/environment-c-111_112 /uv-sensor-moduleuvm30a-p-716.html * Because this table is pretty lineair, we can calculate a UVI with one decimal * * Connect sensor: * * + >>> 5V * - >>> GND * out >>> A0 * * License: Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0) */ #include <SPI.h> #include <MySensor.h> #include <MySensor.h> #include <SPI.h> #define UV_SENSOR_ANALOG_PIN 0 #define CHILD_ID_UV 0 unsigned long SLEEP_TIME = 30*1000; // Sleep time between reads (in milliseconds) MySensor gw; MyMessage uvMsg(CHILD_ID_UV, V_UV); unsigned long lastSend =0; float uvIndex; float lastUV = -1; uint16_t uvIndexValue [12] = { 50, 227, 318, 408, 503, 606, 696, 795, 881, 976, 1079, 1170}; void setup() { gw.begin(); // Send the sketch version information to the gateway and Controller gw.sendSketchInfo("UV Sensor", "1.2"); // Register all sensors to gateway (they will be created as child devices) gw.present(CHILD_ID_UV, S_UV); } void loop() { unsigned long currentTime = millis(); uint16_t uv = analogRead(UV_SENSOR_ANALOG_PIN);// Get UV value if (uv>1170) uv=1170; //Serial.print("UV Analog reading: "); //Serial.println(uv); int i; for (i = 0; i < 12; i++) { if (uv <= uvIndexValue[i]) { uvIndex = i; break; } } //calculate 1 decimal if possible if (i>0) { float vRange=uvIndexValue[i]-uvIndexValue[i-1]; float vCalc=uv-uvIndexValue[i-1]; uvIndex+=(1.0/vRange)*vCalc-1.0; } //Serial.print("UVI: "); //Serial.println(uvIndex,2); //Send value to gateway if changed, or at least every 5 minutes if ((uvIndex != lastUV)||(currentTime-lastSend >= 5UL*60UL*1000UL)) { lastSend=currentTime; gw.send(uvMsg.set(uvIndex,2)); lastUV = uvIndex; } gw.sleep(SLEEP_TIME);}
-
Aha! I thought it might have been a gateway issue. Yes of course I am running ver 1.5 so I will try v1.4.2 and report back how it goes!
In the meantime here are my configs.
I have loaded the UV node information into Fhem but it still will not recognize the node.Here is my Fhem config.
attr global userattr cmdIcon devStateIcon devStateStyle icon sortby webCmd widgetOverride attr global autoload_undefined_devices 1 attr global logfile ./log/fhem-%Y-%m.log attr global modpath . attr global motd SecurityCheck:\ \ WEB,WEBphone,WEBtablet has no associated allowed device with basicAuth.\ telnetPort has no associated allowed device with password/globalpassword.\ \ Restart FHEM for a new check if the problem is fixed,\ or set the global attribute motd to none to supress this message.\ attr global statefile ./log/fhem.save attr global updateInBackground 1 attr global verbose 3 define telnetPort telnet 7072 global define WEB FHEMWEB 8083 global define WEBphone FHEMWEB 8084 global attr WEBphone stylesheetPrefix smallscreen define WEBtablet FHEMWEB 8085 global attr WEBtablet stylesheetPrefix touchpad # Fake FileLog entry, to access the fhem log from FHEMWEB define Logfile FileLog ./log/fhem-%Y-%m.log fakelog define autocreate autocreate attr autocreate filelog ./log/%NAME-%Y.log define eventTypes eventTypes ./log/eventTypes.txt # Disable this to avoid looking for new USB devices on startup define initialUsbCheck notify global:INITIALIZED usb create define gateway MYSENSORS /dev/ttyUSB0@57600 attr gateway autocreate 1 attr gateway first-sensorid 10 attr gateway icon it_wireless_dcf77 attr gateway stateFormat connection define UVSensor MYSENSORS_DEVICE 10 attr UVSensor IODev gateway attr UVSensor mapReading_uv 0 uv attr UVSensor mode node attr UVSensor version 1.2And a standard UV mysensor Arduino code (no mods).
/** * The MySensors Arduino library handles the wireless radio link and protocol * between your home built sensors/actuators and HA controller of choice. * The sensors forms a self healing radio network with optional repeaters. Each * repeater and gateway builds a routing tables in EEPROM which keeps track of the * network topology allowing messages to be routed to nodes. * * Created by Henrik Ekblad <henrik.ekblad@mysensors.org> * Copyright (C) 2013-2015 Sensnology AB * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors * * Documentation: http://www.mysensors.org * Support Forum: http://forum.mysensors.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * ******************************* * * REVISION HISTORY * Version 1.0 - epierre * Contribution: bulldoglowell, gizmocuz * * DESCRIPTION * Arduino UVM-30A * Index table taken from: http://www.elecrow.com/sensors-c-111/environment-c-111_112 /uv-sensor-moduleuvm30a-p-716.html * Because this table is pretty lineair, we can calculate a UVI with one decimal * * Connect sensor: * * + >>> 5V * - >>> GND * out >>> A0 * * License: Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0) */ #include <SPI.h> #include <MySensor.h> #include <MySensor.h> #include <SPI.h> #define UV_SENSOR_ANALOG_PIN 0 #define CHILD_ID_UV 0 unsigned long SLEEP_TIME = 30*1000; // Sleep time between reads (in milliseconds) MySensor gw; MyMessage uvMsg(CHILD_ID_UV, V_UV); unsigned long lastSend =0; float uvIndex; float lastUV = -1; uint16_t uvIndexValue [12] = { 50, 227, 318, 408, 503, 606, 696, 795, 881, 976, 1079, 1170}; void setup() { gw.begin(); // Send the sketch version information to the gateway and Controller gw.sendSketchInfo("UV Sensor", "1.2"); // Register all sensors to gateway (they will be created as child devices) gw.present(CHILD_ID_UV, S_UV); } void loop() { unsigned long currentTime = millis(); uint16_t uv = analogRead(UV_SENSOR_ANALOG_PIN);// Get UV value if (uv>1170) uv=1170; //Serial.print("UV Analog reading: "); //Serial.println(uv); int i; for (i = 0; i < 12; i++) { if (uv <= uvIndexValue[i]) { uvIndex = i; break; } } //calculate 1 decimal if possible if (i>0) { float vRange=uvIndexValue[i]-uvIndexValue[i-1]; float vCalc=uv-uvIndexValue[i-1]; uvIndex+=(1.0/vRange)*vCalc-1.0; } //Serial.print("UVI: "); //Serial.println(uvIndex,2); //Send value to gateway if changed, or at least every 5 minutes if ((uvIndex != lastUV)||(currentTime-lastSend >= 5UL*60UL*1000UL)) { lastSend=currentTime; gw.send(uvMsg.set(uvIndex,2)); lastUV = uvIndex; } gw.sleep(SLEEP_TIME);}
-
Not concerned with bugs in the UV Sketch as I will make my own sketches once I get the controller to recognize the nodes.
My plan is to adapt some code to make tank level sensors and an analog (not pulse based) kWh meter. Also planning to control some pumps, so those will be outputs.
So should I use Arduino 1.4.2 for compiling code for Gateway and all the nodes, yes? -
Not concerned with bugs in the UV Sketch as I will make my own sketches once I get the controller to recognize the nodes.
My plan is to adapt some code to make tank level sensors and an analog (not pulse based) kWh meter. Also planning to control some pumps, so those will be outputs.
So should I use Arduino 1.4.2 for compiling code for Gateway and all the nodes, yes? -
