MYSBootloader 1.3 pre-release & MYSController 1.0.0beta

[scalz]

yes that's it. a bug in your code, like infinite loop, ram troubles... that should be rare depending of your code. plus generally you/I test on breadboard before sending it in prod, but that can happen and is good to know ;)

[ahmedadelhosni]

@scalz great.
This means that MYSBootloader can handle this problem and enter the bootloader mode even if the MCU freezes.

@tekka you state that the current version can handle a freeze SW. Also if the new code is corrupted during programming by unverified CRC or whatever, it will also handle that problem and resets and wait for a new flashing order.
Is this new in this version ? I am some how sure that MYSBootloader previously had a problem handling thoses types of failures, and that's why I was going to use DualOptiboot as I read before that it can handle those failures

Sorry for lots of questions but I am trying to reorganise my info.

[rollercontainer]

@mannkind @tekka

So its working with a GatewayW5100MQTTClient aswell? That would be fantastic, I thought its only for serial and ethernet gateways. Do I also have to use port 5003?

[Fabien]

@tekka If this can help for an RFM69 version :
https://github.com/vvvlc/Funky-FOTA

[cdr]

@rollercontainer confirmed working with W5100mqtt here!

[rollercontainer]

I have to ask again: GatewayW5100MQTTClient or the old Broker Gateway?
I am not able to connect to my GatewayW5100MQTTClient on port 1883 or 5003 with MYSController 1.0.0beta.
The gateway is in working condition with openHAB.

[mannkind]

This post is deleted!

[rollercontainer]

@mannkind

THX! What difference a single letter makes... ^^

@cdr What do you use exactly?

[n1ck1355]

Hello @ all :)
first thx to tekka for the great job :)
as the release notes say with the mysbootloader 1.3pre one can use the serial upload.
is its usable via the arduino ide? Because i can upload a sketch but it seems not to start.

also as rollercontainer asked is the myscontroller application usable via the old broker or with the new clientmqtt gateway?
Would be nice if there are some instructions how to use ;)

[tekka]

@n1ck1355 @rollercontainer MYSController does not support MQTT (at the moment), but have a look at MyController.org. Please provide more details regarding your issue with MYSBootloader 1.3pre.

[n1ck1355]

thx tekka for clearing this :)
for my bootloader problem:
i burned the 1.3mysbootloader with the 8mhz config successfully from the arduino dev ide.
then i uploaded a little test sketch like this without errors:

void setup() {
  Serial.begin(57600);
  Serial.println("Setup Start");
}

void loop() {
}

but there is no output on the serial monitor. it lookes like the bootloader didn't start the sketch.

[Fabien]

I try to add new hex file in MYSController 1.0 but after clicking "reload repo", it tells me 2107-15-31 is not a valid date specification. I don't have the ability to select firmware after this. And after a reboot the "reload repo" is garyed.
Arduino ide 1.6.7
csv :

Type,Name,Version,File,Comments
10,Blink,1,Blink.ino.hex,blinking example
20,TimeReporter,1,TimeReporter.ino.hex,TimeReporter demo
30,SenseBender,1,SensebenderMicro.ino.hex,Sensebender micro

Another 'bug". It always ask me to download a "new" version ... I install it but ask me again (1.0 beta)
I think this issue is related to the last arduino IDE version.

[tekka]

@Fabien Are you running MYSController on WINE? I updated a few things, please update to the most recent version of MYSController (build 3312, here or via update button) and post the log. Thanks.

[tekka]

@n1ck1355 Please enable logging in MYSController, reboot the node and post the log here after a few mins of recording.

[Takero]

Hi, i like OTA Update :-)

How it is possible to change the Cannel from 76 to 105?

[rollercontainer]

@Takero https://github.com/mysensors/Arduino/blob/development/libraries/MySensors/MyConfig.h#L387

[Takero]

@rollercontainer said:

@Takero https://github.com/mysensors/Arduino/blob/development/libraries/MySensors/MyConfig.h#L387

Yes, i know what, but this is not there I am looking for.

The Autor wrote:
Attached bootloader file, compiled with these settings:

nRF24 (Channel 76, base address 0xA8A8E1FC00, data rate 250kbs)
115200 baud (16Mhz) or 57600 (8Mhz)

I want a Bootloader file with Channel 105.

[rollercontainer]

sorry, you are right. Since the source isnt yet available, you cant compile your custom bootloader. So, thats a no.

[n1ck1355]

@tekka here is the log output:

05.04.16 21:51:34	STARTUP	Initialize message logging
05.04.16 21:51:34	STARTUP	1.0.0 (build 3312)
05.04.16 21:51:34	STARTUP	FPC 3.0.0 / Lazarus 1.6
05.04.16 21:51:34	STARTUP	still under development :) tekka 2016
05.04.16 21:51:34	STARTUP	Load INI file...
05.04.16 21:51:34	STARTUP	INI version NA
05.04.16 21:52:08	INFO	Connected to 192.168.0.101:5003
05.04.16 21:52:23	RX	2;255;3;0;15;0100
05.04.16 21:52:23	NODE	New node discovered, node id=2
05.04.16 21:52:23	CHILD	New child discovered, node id=2, child id=internal
05.04.16 21:52:30	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:52:30	DEBUG	Undefined firmware/type for node=2
05.04.16 21:52:30	INFO	BL version=258
05.04.16 21:52:30	INFO	No FW assigned
05.04.16 21:52:36	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:52:36	DEBUG	Undefined firmware/type for node=2
05.04.16 21:52:36	INFO	BL version=258
05.04.16 21:52:36	INFO	No FW assigned
05.04.16 21:52:43	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:52:43	DEBUG	Undefined firmware/type for node=2
05.04.16 21:52:43	INFO	BL version=258
05.04.16 21:52:43	INFO	No FW assigned
05.04.16 21:53:00	RX	2;255;3;0;15;0100
05.04.16 21:53:07	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:53:07	DEBUG	Undefined firmware/type for node=2
05.04.16 21:53:07	INFO	BL version=258
05.04.16 21:53:07	INFO	No FW assigned
05.04.16 21:53:14	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:53:14	DEBUG	Undefined firmware/type for node=2
05.04.16 21:53:14	INFO	BL version=258
05.04.16 21:53:14	INFO	No FW assigned
05.04.16 21:53:21	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:53:21	DEBUG	Undefined firmware/type for node=2
05.04.16 21:53:21	INFO	BL version=258
05.04.16 21:53:21	INFO	No FW assigned
05.04.16 21:53:38	RX	2;255;3;0;15;0100
05.04.16 21:53:45	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:53:45	DEBUG	Undefined firmware/type for node=2
05.04.16 21:53:45	INFO	BL version=258
05.04.16 21:53:45	INFO	No FW assigned
05.04.16 21:53:52	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:53:52	DEBUG	Undefined firmware/type for node=2
05.04.16 21:53:52	INFO	BL version=258
05.04.16 21:53:52	INFO	No FW assigned
05.04.16 21:53:58	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:53:58	DEBUG	Undefined firmware/type for node=2
05.04.16 21:53:58	INFO	BL version=258
05.04.16 21:53:58	INFO	No FW assigned
05.04.16 21:54:16	RX	2;255;3;0;15;0100
05.04.16 21:54:23	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:54:23	DEBUG	Undefined firmware/type for node=2
05.04.16 21:54:23	INFO	BL version=258
05.04.16 21:54:23	INFO	No FW assigned
05.04.16 21:54:29	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:54:29	DEBUG	Undefined firmware/type for node=2
05.04.16 21:54:29	INFO	BL version=258
05.04.16 21:54:29	INFO	No FW assigned
05.04.16 21:54:36	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:54:36	DEBUG	Undefined firmware/type for node=2
05.04.16 21:54:36	INFO	BL version=258
05.04.16 21:54:36	INFO	No FW assigned
05.04.16 21:54:54	RX	2;255;3;0;15;0100
05.04.16 21:55:01	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:55:01	DEBUG	Undefined firmware/type for node=2
05.04.16 21:55:01	INFO	BL version=258
05.04.16 21:55:01	INFO	No FW assigned
05.04.16 21:55:07	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:55:07	DEBUG	Undefined firmware/type for node=2
05.04.16 21:55:07	INFO	BL version=258
05.04.16 21:55:07	INFO	No FW assigned
05.04.16 21:55:14	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:55:14	DEBUG	Undefined firmware/type for node=2
05.04.16 21:55:14	INFO	BL version=258
05.04.16 21:55:14	INFO	No FW assigned
05.04.16 21:55:32	RX	2;255;3;0;15;0100
05.04.16 21:55:38	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:55:38	DEBUG	Undefined firmware/type for node=2
05.04.16 21:55:38	INFO	BL version=258
05.04.16 21:55:38	INFO	No FW assigned
05.04.16 21:55:45	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:55:45	DEBUG	Undefined firmware/type for node=2
05.04.16 21:55:45	INFO	BL version=258
05.04.16 21:55:45	INFO	No FW assigned
05.04.16 21:55:52	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:55:52	DEBUG	Undefined firmware/type for node=2
05.04.16 21:55:52	INFO	BL version=258
05.04.16 21:55:52	INFO	No FW assigned
05.04.16 21:56:10	RX	2;255;3;0;15;0100
05.04.16 21:56:16	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:56:16	DEBUG	Undefined firmware/type for node=2
05.04.16 21:56:16	INFO	BL version=258
05.04.16 21:56:16	INFO	No FW assigned
05.04.16 21:56:23	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:56:23	DEBUG	Undefined firmware/type for node=2
05.04.16 21:56:23	INFO	BL version=258
05.04.16 21:56:23	INFO	No FW assigned
05.04.16 21:56:30	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:56:30	DEBUG	Undefined firmware/type for node=2
05.04.16 21:56:30	INFO	BL version=258
05.04.16 21:56:30	INFO	No FW assigned
05.04.16 21:56:47	RX	2;255;3;0;15;0100
05.04.16 21:56:54	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:56:54	DEBUG	Undefined firmware/type for node=2
05.04.16 21:56:54	INFO	BL version=258
05.04.16 21:56:54	INFO	No FW assigned
05.04.16 21:57:01	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:57:01	DEBUG	Undefined firmware/type for node=2
05.04.16 21:57:01	INFO	BL version=258
05.04.16 21:57:01	INFO	No FW assigned
05.04.16 21:57:07	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:57:07	DEBUG	Undefined firmware/type for node=2
05.04.16 21:57:07	INFO	BL version=258
05.04.16 21:57:07	INFO	No FW assigned
05.04.16 21:57:25	RX	2;255;3;0;15;0100
05.04.16 21:57:32	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:57:32	DEBUG	Undefined firmware/type for node=2
05.04.16 21:57:32	INFO	BL version=258
05.04.16 21:57:32	INFO	No FW assigned
05.04.16 21:57:39	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:57:39	DEBUG	Undefined firmware/type for node=2
05.04.16 21:57:39	INFO	BL version=258
05.04.16 21:57:39	INFO	No FW assigned
05.04.16 21:57:45	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:57:45	DEBUG	Undefined firmware/type for node=2
05.04.16 21:57:45	INFO	BL version=258
05.04.16 21:57:45	INFO	No FW assigned
05.04.16 21:58:03	RX	2;255;3;0;15;0100
05.04.16 21:58:10	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:58:10	DEBUG	Undefined firmware/type for node=2
05.04.16 21:58:10	INFO	BL version=258
05.04.16 21:58:10	INFO	No FW assigned
05.04.16 21:58:16	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:58:16	DEBUG	Undefined firmware/type for node=2
05.04.16 21:58:16	INFO	BL version=258
05.04.16 21:58:16	INFO	No FW assigned
05.04.16 21:58:23	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:58:23	DEBUG	Undefined firmware/type for node=2
05.04.16 21:58:23	INFO	BL version=258
05.04.16 21:58:23	INFO	No FW assigned
05.04.16 21:58:41	RX	2;255;3;0;15;0100
05.04.16 21:58:45	USER	Debug=FALSE
05.04.16 21:58:45	INFO	*** Logging STOP ***
05.04.16 21:58:47	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:58:47	DEBUG	Undefined firmware/type for node=2
05.04.16 21:58:47	INFO	BL version=258
05.04.16 21:58:47	INFO	No FW assigned
05.04.16 21:58:54	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:58:54	DEBUG	Undefined firmware/type for node=2
05.04.16 21:58:54	INFO	BL version=258
05.04.16 21:58:54	INFO	No FW assigned
05.04.16 21:59:01	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:59:01	DEBUG	Undefined firmware/type for node=2
05.04.16 21:59:01	INFO	BL version=258
05.04.16 21:59:01	INFO	No FW assigned

hope it helps finding out whats wrong ;)

[Fabien]

@tekka I try with build 3312 and working fine with wine
Now I'm looking for I_PRESENTATION. With 2.0 beta it doesn't seem to work. May I use smartSleep ?