Mi-Light controller for Mysensors

Łukasz Kostrzewa

Hi

Anyone have idea how to modify the code to pair domoticz to more than one bulb?
With actual code I am able to ON/OFF only one bulb :(

Any idea?

Best regards

Łukasz Kostrzewa

Anybody?

Cliff Karlsson

I would also like this to work with domoticz but as I lack the skills nececary I am now waiting on the next RFlink firmware witch is adding the feature of controlling mi-lights.
I still think that the node/repeater as descripbed in this topic would be better but as I have no options the RFlink is better than using the standard milight bridge an any way.

I have added a NRF24L01 PA to my RFlink gateway and am hoping that the range will cover my whole house.

Łukasz Kostrzewa

Thx for info
Best regards

Łukasz Kostrzewa

I have new problem.
I paired wrong bulb and now I can't unpair it.
How to do that?
Best regards

Iraklis Kourtis

Hi Ted,

Your project looks really amazing and I think it is exactly what I was looking for.
I want to change my lighting at home. I am thinking of adding 8 LED strips that will be controlled by 2 x 4 Mi-Light remote controls and 2 x wifi bridges. As I would like to still be able to use the wall switches to turn them on/off I was thinking of using your solution. Do you think it will be feasible with your project? Also is there a way to reduce the wifi bridges to 1 instead of having 2?

Thank you for this great project!

Iraklis

ted

@Łukasz-Kostrzewa
sorry for the delay. you need to send the unpair command right after turning on the light. see https://hackaday.io/project/5888-reverse-engineering-the-milight-on-air-protocol

ted

@Iraklis-Kourtis
The controller is all you need to control the lights. It does not need wifi bridge

CrankyCoder

Has this been converted to 2.0?

Also, to build the controller for this i don't need anything special other than the arduino + nrf24l01 correct? I am VERY interested in this

CrankyCoder

i got 2 of my milight bulbs in today. Just wondering if anyone is still using this?

Cliff Karlsson

@Jason-Brunk said:

n today. Just wondering if anyone is still using this?

I would like to use this solution as it seams to be really great to have both a NRF/Mi-light-Repeater for every "node". But my skils are not enough to make this work with RGB-strips/bulbs and to have it working with domoticz. I am using the standard Domoticz way of controllign them using the original mi-light gateways and have also experimented with RF-link mi-light control.

But my dream-scenario is that some nice coding-wiz will post a complete solution that even newbies can integrate this in this forum-thread. But I would not count on it.

CrankyCoder

I have done a little bit of tinkering with it today. i have not cleaned up the code yet, but I have been able to get my arduino repeater to pair with one of the lights, and turn it on and off. My progress so far.

Convert to using the mysensor 2.0 framework
setup a bulb and paired
can turn bulb on and off

My next step is to see if i can change colors on the bulb. The only thing I noticed is there is a small delay when switching the radio between the mysensors rf and the milight rf protocol. I may later see if it's possible to do 2 radios. But for now progress is being made with a repeater node.

Once it's working, Ill see if i can post some samples of how I controlled it via mqtt. (I use openhab)

If the original author of this sketch is interested I will provide him current code progress. Or I can throw it on github if anyone is interested in tinkering with it. I definitely want to get some documentation together for how to get multiple bulbs working on it.

CrankyCoder

I have put my mods on github.

https://github.com/brunkj/MySensorsMiLight/

I have not been able to mess with it since the weekend. Still trying to get some info on the RGB part. If anyone wants to take a shot at it let me know if you make any progress :)

CrankyCoder

spent some more time working on this. Still not having luck figuring out a what to send to the V_VAR1 to get the bulb to do anything

I can send simple on off for S_LIGHT V_STATUS

if (message.type == V_STATUS)
  {
    //Serial.println("triggered V_STATUS");
    mlr.begin();

    // Change light status
    Serial.println(message.getBool());
    if ( message.getBool())
    {
      Serial.println("here");
      // Serial.println("triggered ON");
      sendCommand (outgoingPacket_on, sizeof(outgoingPacket_on));
    }


    else {
      //  Serial.println("triggered off");
      sendCommand(outgoingPacket_off, sizeof(outgoingPacket_off));
    }
    _begin();
  }

Easy. But the V_VAR1 on S_CUSTOM I can't figure out what to put in the payload

if (message.type == V_VAR1)
  {
    // Serial.println("triggered V_VAR1");
    
    incomingCommand = (char *)message.getCustom();
    Serial.println((char *)message.getCustom());
     mlr.begin();
     Serial.println("#############");
    for (int i=0; i<sizeof(outgoingPacket); i++)
    { outgoingPacket[i] = 16*char_to_uint8_t(incomingCommand[i*2]) + char_to_uint8_t(incomingCommand[i*2+1]);
      Serial.println(outgoingPacket[i]);
      }
    Serial.println("#############");
    Serial.write(outgoingPacket, 7);
    sendCommand(outgoingPacket, sizeof(outgoingPacket));
    _begin();
  }

I have referenced the hacking milight protocol pages and many other, I just can't seem to get it right to get my bulb to do anything.

Anyone want to take a shot at it? or have payload data I could try?

full sketch

#define MY_DEBUG 
#define MY_RADIO_NRF24
#define MY_REPEATER_FEATURE
#include <MyConfig.h>
#include <MySensors.h>

#include <SPI.h>
#define CE_PIN 9     //CE and CSN pin for nrf24 radio
#define CSN_PIN 10
#include <nRF_24L01.h>
#include <avr/power.h>
#include <printf.h>

#include "PL1167_nRF24.h"
#include "MiLightRadio.h"


#define NODE_ID 100
#define mi_command_repeat 30   //# of times to resend the command to bulb




RF_24 mi_radio(CE_PIN, CSN_PIN);
PL1167_nRF24 prf(mi_radio);
MiLightRadio mlr(prf);
                                       // B0-176   F2-242    EA-234    6D    B0    02    f0
static uint8_t outgoingPacket_on[7] = { 0xB0, 0xF2, 0xEA, 0x6D, 0x91, 0x03, 0x00};  //the first three #s are remote ID, replace with yours
static uint8_t outgoingPacket_off[7] = { 0xB0, 0xF2, 0xEA, 0x04, 0x91, 0x04, 0x00};
uint8_t outgoingPacket[7];

#define sizeofincomingCommand 15 //command comes in text form of 7 uint8_t, with an additional NULL at end

char *incomingCommand;    //array for incoming command

 
boolean mi_radio_state = false;
void presentation()  
{  
  //Send the sensor node sketch version information to the gateway
  sendSketchInfo("Milight controller", "1.0");
}

void setup()
{  
  
   //clock_prescale_set(clock_div_2);     //for a barebone atmega328p, this  will make the CPU running at 4MHz.
  //Serial.begin(115200);
  // The third argument enables repeater mode.

  //Send the sensor node sketch version information to the gateway
  present(0, S_LIGHT);
  present(1, S_CUSTOM);



}




void receive(const MyMessage &message) {
  // The command will be transmitted in V_VAR1 type, in the following 7 byte format: ID1 ID2 ID3 COLOR BRIGHTNESS COMMAND.
  // see https://hackaday.io/project/5888-reverse-engineering-the-milight-on-air-protocol
  Serial.println(message.type);
  if (message.type == V_STATUS)
  {
    //Serial.println("triggered V_STATUS");
    mlr.begin();

    // Change light status
    Serial.println(message.getBool());
    if ( message.getBool())
    {
      Serial.println("here");
      // Serial.println("triggered ON");
      sendCommand (outgoingPacket_on, sizeof(outgoingPacket_on));
    }


    else {
      //  Serial.println("triggered off");
      sendCommand(outgoingPacket_off, sizeof(outgoingPacket_off));
    }
    _begin();
  }


  if (message.type == V_VAR1)
  {
    // Serial.println("triggered V_VAR1");
    
    incomingCommand = (char *)message.getCustom();
    Serial.println((char *)message.getCustom());
     mlr.begin();
     Serial.println("#############");
    for (int i=0; i<sizeof(outgoingPacket); i++)
    { outgoingPacket[i] = 16*char_to_uint8_t(incomingCommand[i*2]) + char_to_uint8_t(incomingCommand[i*2+1]);
      Serial.println(outgoingPacket[i]);
      }
    Serial.println("#############");
    Serial.write(outgoingPacket, 7);
    sendCommand(outgoingPacket, sizeof(outgoingPacket));
    _begin();
  }

//gw.begin(incomingMessage, NODE_ID, true);




}

void sendCommand(uint8_t mi_Command[7], int sizeofcommand)
{ for (int i = 0; i < mi_command_repeat; i++)
  { mlr.write(mi_Command, sizeofcommand);
  }
}

uint8_t char_to_uint8_t(char c) 
{
	uint8_t i;
	if (c <= '9')
		i = c - '0';
	else if (c >= 'a')
		i = c - 'a' + 10;
	else
		i = c - 'A' + 10;
	return i;
}

n1ck1355

@Jason-Brunk
unfortunately i havnt got my own milight bulbs but for what i've seen on the
reverse engineered protocol page the payload must be something like
"07B0F2EA359001B9ACF9" for all on or
"07B0F2EA7D910FD4EC72" for green

or the part "07B0F2EA" must be the ID so the payload
is somethink like "359001B9ACF9" for all on and
"7D910FD4EC72" for green

n1ck1355

@ted are you there and can get a hint please? :)

ted

@n1ck1355 @Jason-Brunk
sorry i'm been really busy with job recently. I used openhab to send the payload to V_VAR1 and S_CUSTOM. When I get home tonight, I'll post the openhab rule file so people can get some sense how to control color.

n1ck1355

that's really great :) Thanks!

ted

@n1ck1355
sorry for the delay. Here is what I learned from https://hackaday.io/project/5888-reverse-engineering-the-milight-on-air-protocol

Basically, the mi controller will receive text string and convert them into HEX format and send it to the bulb. The text string should be formatted as the following (+ added for easy of reading, no '+' in the actual command):

ID + color + brightness + button code + seq

The ID is the ID of the bulb to be controlled, it is six byte in ASCII but will be converted into 3 byte HEX before sending to the bulb.
color, brightness and button code are each 2 byte in ASCII and will be converted into 1 byte HEX and send to bulb.
Seq is 2 byte in ASCII but it appears that you can just use "00".

To change color, you need to send a color code (e.g.: "00"=purple, "1B"=red, "40"=yellow,e tc) and using button code "OF".
To change back to white, you use "04" as color code and "13" as button code.

The detailed button code definition can be found here:
https://cdn.hackaday.io/images/1224221432724803073.jpg

Hope this helps.

n1ck1355

Thank you @ted :)
i already played with it and can turn the bulbs on/off. i will play around with your
information to make the other funktions work.

But what i see is that you cannot e.g. dim the bulbs softly from say 100% to 20% cause
that would be more commands behind each other. But the node must reset itself after
each command by calling _Begin() and that takes some time..
any suggestions to resolve that?

Mi-Light controller for Mysensors

12

11.7k

11.2k

113.1k