VeraPlus - sensors not showing data on dashboard
-
Hello all,
So I got my ethernet GW going , as well as my first testing sensor and I run on VeraPlus gateway.
The sensor is working and the gateway is ethernet GW is recieving data:It is a bit unstable - sometimes I get: "Failed reading humidity from DHT" but most of the time it works ok. I do not have a resistor on the PCB for the DHT though.
On vera the recognition of the sensor went fine, I got a node and 2 readings - temp and humidity. My problem really is that although I can see the values being recieved by the GW via serial monitor - Vera does not show it - it's just blank:
Any ideas?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login