MySensors 2.0.0 Released

[tante ju]

@Tore-André-Rosander said:

@tante-ju Some sort of cache problem? I had a similar issue with the beta, i used the clear eeprom sketch on the node and set a different node id manually and fixed it.

EDIT: Had the same problem now with the v2 release, clear eeprom on the node solved it

Hi, as the same type of old code is written in a new proc, it could not be the EEPROM. The Arduino environment together with the new MySensors lib seems to build some object files only once and then uploads them all the time.

[ninkasi]

@Lior-Rubin said:

Hi, when I'm try to upload the sketch GatewayESP8266 I got the following error:

In file included from /Users/liorrubin/Documents/Arduino/libraries/MySensors-2.0.0/MySensors.h:299:0,
                 from /var/folders/l0/kxrb9wmd6rj651nw4gld5nx00000gn/T/arduino_modified_sketch_982538/GatewayESP8266.ino:137:
/Users/liorrubin/Documents/Arduino/libraries/MySensors-2.0.0/core/MyMainESP8266.cpp:4:10: error: #include expects "FILENAME" or <FILENAME>
 #include “Schedule.h”
          ^
In file included from /Users/liorrubin/Documents/Arduino/libraries/MySensors-2.0.0/MySensors.h:299:0,
                 from /var/folders/l0/kxrb9wmd6rj651nw4gld5nx00000gn/T/arduino_modified_sketch_982538/GatewayESP8266.ino:137:
/Users/liorrubin/Documents/Arduino/libraries/MySensors-2.0.0/core/MyMainESP8266.cpp:13:26: fatal error: core_version.h: No such file or directory
 #include <core_version.h>
                          ^
compilation terminated.
exit status 1
Error compiling for board NodeMCU 1.0 (ESP-12E Module).

Even when i try to comment the "Include Schedule.h" then i got an error about the "core_version.h" file.

anyone ?

Just started playing with mysensors - in my case trying to use a WeMos D1R2. I was getting the same errors - although I can happily compile other sketches on the boards so I knew it wasn't me.... well, probably not entirely. I think maybe because I've only recently started using it perhaps I don't have older libraries installed as well as the current ones? Anyhow, horrible hack is as follows:

1. Go to https://github.com/esp8266/Arduino
2. Download the core branch
3. Open the zip file and go to the cores/esp8266 directory (yes you can also download just the files below individually, but I have found in the past you can have issues with corrupted files doing it that way - feel free to give it a go if you want)
4. Copy the files Schedule.cpp, Schedule.h, and core_version.h and put them into your arduino\libraries\MySensors-master directory

Compile away and hopefully it will work this time! Did for me...... ;-)

Note - if you decide to use your board for sensors as well you may have to copy over other supporting files.

Cheers

Update - for some weird reason errors came back, and I could not trace the cause easily. Decided to do a clean install - backup up my sketches, and removed the Arduino IDE along with the libraries. Note that on my mac there was a library folder both in my documents as well as in username\Library. Anyhow, reinstalled, re-downloaded everything, and my sketches compiled without an issue.

[Борис Башкинцев]

What does it mean?
"Gateway just another sensor node! So now you can have wired ethernet sensors and wireless ESP8266 sensors without any radio attach if you want."

I have serial gateway with nfr radio, connected to PC with home assistant. How can I add ethernet node without radio to this setup? How it will be talk with gateway?

[Anticimex]

@Борис-Башкинцев i believe it is to be interpreted as you set up "many" gateways, but you don't mount radios on them. Instead you connect sensors directly to the gateway and then connect the gateways to your controller. Using WiFi or ethernet. That way, your gateways act as a sort of sensor node network connected using WiFi/ethernet instead of NRF or RFM radios.

[Mark Swift]

@hek said:

Yes, this in the new normal... we moved all the examples using external library dependencies into https://github.com/mysensors/MySensorsArduinoExamples until we can figure out which ones work with auto-dependency-download using the IDE Library Manager.

We would really appreciate some help doing the verification.

How does the auto download work @hek

[hek]

@Mark-Swift, you mean the verification of the moved examples?

[Daniel Oliveira]

Hi all,

I'm sorry if this was already answered.

But how should we manage libraries that were included in the MySensors 1.5.x and are no more in the 2.0.x?
For example DHT and BH1750.

Thank you in advance,
Daniel

[fets]

@Daniel-Oliveira check previous hek's answer

[bomber]

@Anticimex Lots of nice features are listed in announcement!

Where I can find documentation for v2?
I'd like to try MQTT gateway on W5500 chip and I'd like to test sensors connected directly to gateway but I have no clue how to start.

Vj

[blacey]

@bomber API 2.0

[alfredb]

@bomber I'm using a W5500 with locally attached sensors, only thing you have to do is use a customized version of the Ethernet library. Like this one https://github.com/embeddist/WIZ_Ethernet_Library-IDE1.6.x.

[mpp]

Hi @tekka Some documentation on "pm open,type:2 0" and what it means would be useful.

[tekka]

@mpp said in MySensors 2.0.0 Released:

pm open,type:2 0

This is a message emitted by the ESP8266 core, not MySensors related.