Well I'm lost

[5546dug]

If I can get the veralite ui5 to work with 1.4 plugin then the vera3 will be reset to ui5 until ui7 is a little more stable and friendly.
I just need one system and a little hair!

[niccodemi]

@5546dug said:

just thinking out loud Would this be best done using chrome or internet explorer browser?
I downloaded the zip from gitrepo with chrome but may have used ie to upload to veralite.
Issues?

I don't think it should matter.

[5546dug]

this is silly--- reloaded the files one by one from laptop to veralite and got the same thing ver 1.3 with no library ver.

[5546dug]

just uploaded again from my files on laptop to the vera lua files as shown on my sensors
I did them one by one it says upload ok
create new device config serial port and there it is again! ver 1.3 and no lib version

red banner " Lua startup failure"

[niccodemi]

@5546dug I guess you are uploading wrong files or something is wrong with vera. Did you try removing Mysensors plugin and rebooting (not just reloading) vera before uploading new files?

Anyway if you want to remove files from vera check this thread and this one on how to get your ssh password. Maybe you could also ask MIOS support to remove files for you.

[5546dug]

ok progress

I Do need to upload the vera plugin file sto veralite with chrome,
Under the Devices page the device MySensors Plugin was created showing
plugin ver 1.4
lib ver
so looking at the serial config there was not any
research on this site under /Lost USB/ Serial Port on Vera3 again
@blacey gave advice to @clippermiami on how he acheves usb connection
unplug usb>reload>plug usb>reload> set config for port
now I have port set for gw/vera communications
no lib version yet
I know the files are in folder Users/Arduino/libraries/Mysensors/
also using nano v3.0 from gravitech and not clone

next step(s)

[5546dug]

Ok So this seems to be the end

After the last post I went by the veralite and saw the inclusion light fluttering

What the heck I pressed the reset button on the nano and then the plus on veralite and left it alone
opened the vera a little later see ver 1.4
lib 1.4

looks like success for now

thanks to you who responded to my plight and those who posted other issuses on this site.
I did not know about inclusion for the gw

Nowtosee if I can get a device to be recognized by vera

keep you informed

[5546dug]

so an update for the veralite ui5

built and installed the humidity sensor
used the my sensor library/humidity and uploaded this to second nano with radio and as the instructions on adding new sensors on the vera plugin page on "My Sensors"/vera,
got the node to be recognized by vera and created three nodes!
main, humidity and temp.

Man this is neat

so thanks again for all your posts on these pages very good help

Guess now it is time to set vera3 back to ui5 until I here ui7 is better than now.
But before doing so will see if the ui7 will let this node be accepted and stop the red "No device detected" banner.

[niccodemi]

good to hear that you got it working. Let us know how it goes on ui7.

[5546dug]

well no suprises it did not work sooo,
reverted to ui5 and after micasa intervention got back-- to normal and starting to rebui;ld all on vera3