S_WATER_QUALITY (Unknown)
-
Can anyone else confirm that this actually works in domoticz? It says it's supported, but when I use the ph example sketch the node and child is seen by the gateway but where it should say S_WATER_QUALITY for the child type it just says unknown!, but according to the controller page domoticz should support this.
-
@mikeS Looks like it in the latest code.
Do you use latest stable release? Maybe it wanst implemented...S_WATER_QUALITY = 39, //!< V_TEMP, V_PH, V_ORP, V_EC, V_STATUS
Do you send any status using the V_ above?
https://github.com/domoticz/domoticz/blob/master/hardware/MySensorsBase.cpp#L1037
Controller: Proxmox VM - Home Assistant
MySensors GW: Arduino Uno - W5100 Ethernet, Gw Shield Nrf24l01+ 2,4Ghz
MySensors GW: Arduino Uno - Gw Shield RFM69, 433mhz
RFLink GW - Arduino Mega + RFLink Shield, 433mhz -
@mikeS Looks like it in the latest code.
Do you use latest stable release? Maybe it wanst implemented...S_WATER_QUALITY = 39, //!< V_TEMP, V_PH, V_ORP, V_EC, V_STATUS
Do you send any status using the V_ above?
https://github.com/domoticz/domoticz/blob/master/hardware/MySensorsBase.cpp#L1037
@sundberg84
Thanks I thought it should work, so I need to change my version of that .cpp file to the one in the link or install some beta version of Domoticz then??
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login