MySensors power consumption
-
@daulagari and @dzairo
You wrote about consumptions of 6uA and 10uA. I know that i can reach down to 1uA (or 10uA) with 3V, intRC, timer2 and ext 32kHz. Not clear for me is the consumption and the mode of the nrf24. Is this current included in your setup and do you disable the radio bei switching off the power of the module ? -Pit -
hi. this power consumption is when radio is in power down , on mcu working only timer2 as rtc and watch dog .. if don't need watch dog then can disable and you will have less power consumption.. but I don't know if have bigger consumption watch dog or timer2 .. depend what you need ..
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login