Serial Gateway halt!

[dzairo]

Hi. sorry.. I forgot ..
Here is serial data from gateway (with date time stamp) and debug serial data from sensor .

Serial Gateway
Gateway.odt

and
Sensor
sensor.odt

in this data you can see :
13:24:15 but gateway record last data : 13:29:49 so the gateway halt after this last packet...
I use standard code from example directory .. and use last ARduino IDE..
regards...

[niccodemi]

which controller do you use?

[dzairo]

sorry.. I not use controller .. only serial port monitor..
really I need controller? can't serial gateway stand alone?

regards

[BulldogLowell]

which sensor sketch are you using?

[niccodemi]

@dzairo I believe it is possible to use it stand-alone but with very limited functionality and possibly code modification. See this and this thread for more info.

[dzairo]

Hi.I use example from source code . Serial gateway and binary switch with sleep.I don't want use serial gateway stand alone like controller. Now I want only received data and understand how it work.. If my gateway halt then controller will not working too.
What is it ? : st=ok or st=false from my report..

regards

[epierre]

@dzairo said:

Serial gateway and binary switch with sleep.I don't want use serial gateway stand alone like controller. Now I want only received data and understand how it work.. If my gateway

Hello,

same issue here after months of good working, I rebooted the cubie exploiting it and no more communications... reboot, same, reflash: same...

I guess I'll have top go back in debug mode....

[dzairo]

Ehm... IF try my own code (GCC + AVR Studio 4.19) then I can send thousand packet (with ACK) from more sensor in same time ..and receiver still receive .. nRF24L01+ is stable IC and work good .. I don't know why not working in MySensor ..

I must write own sensor network code ..
MySensor is writed for Arduino then is too hard emulate in AVRStudio .. is it possible .. but ..

regards.

[epierre]

I updated my git repository, re flashed the gateway and we're back ....

[dzairo]

Hi. I do same what you ... but still not working ...
BUt then I use different gateway PCB board .. and right now working .. may be hardware problem..
OK.. I will test it .. and will see..

best regards..