Vera Plus and ESP8266
-
I must not be doing the inclusion correctly in my sketch or in general as I see this in the Vera logs:
08 03/19/17 10:20:56.071 JobHandler_LuaUPnP::HandleActionRequest device: 36 service: urn:upnp-arduino-cc:serviceId:arduino1 action: StartInclusion <0x74d9d520> 08 03/19/17 10:20:56.072 JobHandler_LuaUPnP::HandleActionRequest argument DeviceNum=36 <0x74d9d520> 08 03/19/17 10:20:56.072 JobHandler_LuaUPnP::HandleActionRequest argument serviceId=urn:upnp-arduino-cc:serviceId:arduino1 <0x74d9d520> 08 03/19/17 10:20:56.072 JobHandler_LuaUPnP::HandleActionRequest argument action=StartInclusion <0x74d9d520> 50 03/19/17 10:20:56.073 luup_log:36: Arduino: Sending: 0;0;3;0;5;1 <0x77e42320> 04 03/19/17 10:20:56.078 <Job ID="14" Name="" Device="36" Created="2017-03-19 10:20:56" Started="2017-03-19 10:20:56" Completed="2017-03-19 10:20:56" Duration="0.5062000" Runtime="0.4342000" Status="Successful" LastNote=""/> <0x77e42320> 50 03/19/17 10:20:56.118 luup_log:36: Arduino: urn:upnp-arduino-cc:serviceId:arduino1,InclusionMode, 1, 36 <0x73b3d520> 06 03/19/17 10:20:56.119 Device_Variable::m_szValue_set device: 36 service: urn:upnp-arduino-cc:serviceId:arduino1 variable: InclusionMode was: 0 now: 1 #hooks: 0 upnp: 0 skip: 0 v:0xa920d0/NONE duplicate:0 <0x73b3d520> 50 03/19/17 10:20:56.119 luup_log:36: Arduino: urn:upnp-arduino-cc:serviceId:arduino1,InclusionFoundCountHR, 0 devices found, 36 <0x73b3d520> 06 03/19/17 10:20:56.120 Device_Variable::m_szValue_set device: 36 service: urn:upnp-arduino-cc:serviceId:arduino1 variable: InclusionFoundCountHR was: now: 0 devices found #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x73b3d520>``` -
Maybe you could try commenting out everything in the loop() function to rule out this being the problem.
And if you have not already tried then reboot and/or restart luup for your Vera.
-
@r-nox said in Vera Plus and ESP8266:
#define MY_INCLUSION_MODE_DURATION 60
I uncommented out the above line and tested.... it keeps saying 0 devices found. I also tried removing everything under loop() as well and i get the same behavior.
06 03/20/17 20:24:35.616 Device_Variable::m_szValue_set device: 39 service: urn:upnp-arduino-cc:serviceId:arduino1 variable: InclusionMode was: 0 now: 1 #hooks: 0 upnp: 0 skip: 0 v:0xfc3e10/NONE duplicate:0 <0x73ce5520> 50 03/20/17 20:24:35.616 luup_log:39: Arduino: urn:upnp-arduino-cc:serviceId:arduino1,InclusionFoundCountHR, 0 devices found, 39 <0x73ce5520> 06 03/20/17 20:24:35.616 Device_Variable::m_szValue_set device: 39 service: urn:upnp-arduino-cc:serviceId:arduino1 variable: InclusionFoundCountHR was: now: 0 devices found #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x73ce5520> 50 03/20/17 20:25:35.599 luup_log:39: Arduino: urn:upnp-arduino-cc:serviceId:arduino1,InclusionMode, 0, 39 <0x73ce5520> 06 03/20/17 20:25:35.599 Device_Variable::m_szValue_set device: 39 service: urn:upnp-arduino-cc:serviceId:arduino1 variable: InclusionMode was: 1 now: 0 #hooks: 0 upnp: 0 skip: 0 v:0xfc3e10/NONE duplicate:0 <0x73ce5520> 50 03/20/17 20:25:35.610 luup_log:39: Arduino: urn:upnp-arduino-cc:serviceId:arduino1,InclusionFoundCountHR, , 39 <0x73ce5520> 06 03/20/17 20:25:35.610 Device_Variable::m_szValue_set device: 39 service: urn:upnp-arduino-cc:serviceId:arduino1 variable: InclusionFoundCountHR was: 0 devices found now: #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x73ce5520> 50 03/20/17 20:25:35.611 luup_log:39: Arduino: Inclusion mode ended. <0x73ce5520>and this is what i see in the serial monitor of the gateway:
0;255;3;0;9;MCO:BGN:STP 0;255;3;0;9;MCO:REG:NOT NEEDED 0;255;3;0;9;MCO:BGN:INIT OK,TSP=NA pm open,type:2 0 0;255;3;0;9;Client 0 connected 0;255;3;0;9;Client 0: 0;0;3;0;2;Get Version 0;255;3;0;9;Client 0: 0;255;3;0;9;Client 0: 0;0;3;0;5;1 0;255;3;0;9;Client 0: 0;255;3;0;9;Client 0: 0;0;3;0;5;1 0;255;3;0;9;Client 0: -
Hello djzang
I just built the serial gw using esp-8266 but can not find how to physically hook it to Vera Plus or Vera 3 , do you have step by step instruction as how to do that maybe with pictures and what setup you entered in to the serial port configuration?
Thanks -
Hello djzang
I just built the serial gw using esp-8266 but can not find how to physically hook it to Vera Plus or Vera 3 , do you have step by step instruction as how to do that maybe with pictures and what setup you entered in to the serial port configuration?
Thanks@mntlvr I'm not sure what kind of serial chip is on the ESP8266 but Vera can not detect all types of serial chips because there are no drivers installed. FTDI chips should be detected by Vera automatically and then you just need to set the correct serial port settings:
-
So do you have a working serial general on your Vera now and does it use an ESP 8266 or a Arduino Nano
-
@mntlvr The Vera controllers have a list of supported serial devices. If you look at this page under USB Serial Devices, looking at the chipset column you will see that the FTDI and PL2303 chipsets are the only ones that Vera natively supports. For the 2303 chipsets, some say that they don't work, and others say that manual configuration is needed. Mine luckily just worked with no extra configuration. That list was last modified in 2013 though, so what is supported/works and what doesn't most likely has changed since then.
-
Okay thanks
Well I built a Ethernet board using 1.4.1 library and a W5100 Ethernet board and it worked right off so now I am as curious as heck to make the ESP 8266 work but I still think it has something to do with the newest library. I think I will start out with the Arduino IDE 1.6.4 or something like that and see if that makes a difference. Not very many on this site can help with the issue because they do not have Vera Controllers, so I have to figure this out and just keep trying
