Newbie problems - Sensebender GW + Arduino v1.8.2
-
I've ordered a Sensebender GW from ITEAD, and was just trying to prepare my laptop (MacOS) with the Arduino IDE...
- Downloaded Arduino IDE 1.8.2.
- Added "https://raw.githubusercontent.com/mysensors/ArduinoBoards/master/package_mysensors.org_index.json" to the board manager.
- Installed 'MySensors SAMD Boards' version 1.0.5 from the board manager.
But if I now try to select Sensebender Gateway as a board, Arduino complains "The current selected board needs the core 'arduino:arduino' that is not installed".
Would someone tell me what I've done wrong please?
-
@tomtastic Did you manage to solve this and how?
I updated to latest versions of everything and now I have this issue
-
Have you seen the instructions here https://github.com/mysensors/ArduinoBoards/blob/master/README.md
-
1 out of 4
Suggested Topics
-
Day 1 - Status report
Announcements • 23 Mar 2014, 22:45 • hek 24 Mar 2014, 20:12 -
Suddenly a Sensor is Missing, not the whole Node. (RPI Eth Gateway, HA)
Troubleshooting • 3 Jul 2024, 07:20 • se-O-matic 15 Jul 2024, 08:45 -
Echo request is not set
Troubleshooting • 12 Aug 2024, 15:36 • kamilb85 3 Sept 2024, 08:58 -
Arduino nano and Uno in same My sensors network with NRF24L01+
Troubleshooting • 26 Jul 2024, 10:30 • DIY89 27 Aug 2024, 09:59 -
Some sensors permanently fail after one/two years
Troubleshooting • 25 Jul 2024, 17:17 • Kokosnoot 25 Jul 2024, 17:17