RPi3 GPIO MySensors Gateway + LEDs + LNA Radio + DLink enclosure
-
Project built based on an old D-Link router enclosure.
It is a Raspberry Pi 3 running Home Assistant with a RPi GPIO Gateway.
Dedicated power supply for the radio, wired through a 5v to 3.3v regulator from the 3A 5V power supply.
Ethernet and 2 USB ports available for connections.No soldering.
Easy to build with some Hot Glue... took me 3 hours.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login