Openhab and Gateway Types

[FredRoot]

Hi,

I have a sensor node communicating via RF24 to a Raspberry Pi (RPi) gateway. This RPi gateway is connected via Ethernet to Openhub ( the controller software) also running on the same RPi. This is all working fine. I want to add a SonOff relay to this setup and I want to communicate with the SunOff via MQTT messages.

If I install the MQTT broker software (Mosquitto) on the RPi, will Openhab be able to communicate with the SunOff device, or do I have to add another MQTT gateway application on the RPi?

[gohan]

You don't need anything else.

[FredRoot]

Thank you