💬 NRF51822 Livolo 2 channel 1 way EU switch(VL-C700X-1_Ver_C2)
openhardware.io last edited by openhardware.io
shabba last edited by
Ha! Cool. Great work. Would you have a BOM ?
Hi, unfortunately I don't have time and patience for doing BOM's on all of my projects but in this case it's not very hard as the external component count is greatly reduced by using the NRF51822 RF SOC which is a PTR5518 module from Aliexpress. Other than that there is the Microchip touch sense controller - MTCH105 and the usual smd resistors(0603) and caps. Other than that you're not forced to use and solder the onboard dc-dc converter so you don't have to worry about those components - you just need to solder the 3V_EN jumper to use the Livolo 3V output coming from the main relays/power supply board.