Hey guys, just wondering if anyone has got ms to work with an sx1278 lora radio?
have tried using the rfm defines but no luck. would be great if this could be implemented in the future releases
@Michael-Raykos welcome to the MySensors community!
MySensors has support for sx1278. https://forum.mysensors.org/topic/6820/lora-sx1276-sx1278/ could be useful information for you.
@mfalkvidd Thanks, any working code examples and hardware wiring?
Havnt been able to find anything about what defines to use etc.
@Michael-Raykos I'll get back to you on the wiring and defines. I should have some code and notes on my computer.
In the meanwhile, https://forum.mysensors.org/topic/5777/any-rfm95-user-reports/ might be a good read.
I didn't have any MySensors LoRa code unfortunately. My notes indicate that I used http://cpham.perso.univ-pau.fr/LORA/LoRaDevices.html to figure out some of the wiring.
@mfalkvidd thanks for that.
Hoping someone has got an example code for the sx1278. Ill keep trying when i get some time and see if i can get it to work
Alex Newton last edited by
There is already a LoRa library available for both Arduino Board and STM32 Bluepill Board. Using the simple library, the LoRa Module SX1278 is easily transmitting and receiving data packets.
You can check one of the best example here: (https://how2electronics.com/interfacing-lora-sx1278-stm32-sender-receiver/)