Weather Station with Scene Activator!!!

[BulldogLowell]

@korttoma

I was thinking that perhaps it may be easier/better to recycle V_VAR1 and transmit messages to the node with a leading char. then have the arduino sort out the message based on the header:

for example:

local conditions = luup.variable_get("urn:upnp-micasaverde-com:serviceId:Weather1","Condition", 59)
conditions = "#" .. conditions
luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;3", variableId="VAR_5", value=conditions}, 85)

then sort and strip out the char arduino-side... you could move a lot more message types through one variable

new message types need to be hard coded into Arduino and Vera, so if we want to expand the data flow... it becomes easier this way, no? Perhaps there is a better message type to use for this type of effort...

This device is in our guest house and since I have it open I want to add capabilities like:

1: Message of the day
2: quick SMS type of message
3: alarm clock settable by mobile app
4: twitter feed

stuff like that...

[BulldogLowell]

@korttoma

Tomas, I just wanted to say thanks for the help. My (almost 100% completed) code is here and a couple of videos showing how it works:

first

link text

#define STATES 7
#define HUMIDITY_SENSOR_DIGITAL_PIN 4
#define DEBUG

#ifdef DEBUG
#define DEBUG_SERIAL(x) Serial.begin(x)
#define DEBUG_PRINT(x) Serial.print(x)
#define DEBUG_PRINTLN(x) Serial.println(x)
#else
#define DEBUG_SERIAL(x)
#define DEBUG_PRINT(x) 
#define DEBUG_PRINTLN(x) 
#endif

#include <avr/pgmspace.h>
#include <Wire.h>
#include <Time.h>
#include <SPI.h>
#include <MySensor.h>
#include <LiquidCrystal_I2C.h>
#include <DHT.h> 
//
#define RADIO_ID 11
#define CHILD_ID_SCENE 3
#define CHILD_ID_LED 4
//
LiquidCrystal_I2C lcd(0x27,16,2);  // set the LCD address to 0x27 for a 16 chars and 2 line display
//
void (*lcdDisplay[STATES])();
//
byte state = 0;
byte lastState;
byte timeCounter = 0;
unsigned long lastTime;
unsigned long refreshInterval = 3000UL;
unsigned long lastClockSet;
boolean isMessage = false;
float insideTemperature;
float humidity;
int OutdoorTemp = -99;
int OutdoorHumidity = -99;
int todayHigh = -99; 
int todayLow = -99;
String conditions = "Not yet Reported";
String tomorrowWeather = "Not yet Reported";
String messageOfTheDay = "**Hello There!**";
unsigned long motdTimer;
int ledStatus;// to toggle LCD backlight led
boolean buttonPushed = false;
//
MySensor gw;
DHT dht;
//
MyMessage msgOn(CHILD_ID_SCENE, V_SCENE_ON);
MyMessage msgOff(CHILD_ID_SCENE, V_SCENE_OFF);
MyMessage msgVAR1(CHILD_ID_SCENE, V_VAR1);// outdoor temperature
MyMessage msgVAR2(CHILD_ID_SCENE, V_VAR2);// outdoor humidity
MyMessage msgVAR3(CHILD_ID_SCENE, V_VAR3);//today's low
MyMessage msgVAR4(CHILD_ID_SCENE, V_VAR4);// today's high
MyMessage msgVAR5(CHILD_ID_SCENE, V_VAR5);//conditions
//
MyMessage lightMsg(CHILD_ID_LED, V_LIGHT);
MyMessage msgMOTD(CHILD_ID_LED, V_VAR1); // message of the day
MyMessage msgAlarm(CHILD_ID_LED, V_VAR2); // alarm status
MyMessage msgBrite(CHILD_ID_LED, V_VAR3); // led briteness (nice idea!!!!)
//
void setup()  
{ 
  DEBUG_SERIAL(115200);
  DEBUG_PRINTLN(F("Serial started"));
  attachInterrupt(1, PushButton, CHANGE);
  //
  lcdDisplay[0] = lcdDisplay0;
  lcdDisplay[1] = lcdDisplay1;
  lcdDisplay[2] = lcdDisplay2;
  lcdDisplay[3] = lcdDisplay3;
  lcdDisplay[4] = lcdDisplay4;
  lcdDisplay[5] = lcdDisplay5;
  lcdDisplay[6] = lcdDisplay6;
  //
  dht.setup(HUMIDITY_SENSOR_DIGITAL_PIN);
  gw.begin(getVariables, RADIO_ID);
  gw.sendSketchInfo("WeatherClock", "1.0");
  gw.present(CHILD_ID_SCENE, S_SCENE_CONTROLLER);
  gw.present( CHILD_ID_LED, S_LIGHT);
  //
  lcd.init();
  lcd.clear();
  lcd.backlight();
  lcd.setCursor(0, 0);
  lcd.print("Syncing Time");
  lcd.setCursor(0, 1);
  int clockCounter = 0;
  while(timeStatus() == timeNotSet && clockCounter < 60)
  {
    gw.process();
    gw.requestTime(receiveTime);
    Serial.println("getting Time");
    delay(1000);
    lcd.print(".");
    clockCounter++;
    if (clockCounter > 16)
    {
      lcd.clear();
      lcd.print(F("**Failed Clock**"));
      lcd.setCursor(0,1);
      lcd.print(F("*Syncronization*"));
      delay(2000);
      break;
    }
  }
  lcd.clear();
  lastTime = millis();
}
void loop()      
{
  gw.process();
  if (millis() - lastClockSet >= 60000UL)
  {
    gw.requestTime(receiveTime);
    lastClockSet = millis();
  }
  if (millis() - lastTime >= refreshInterval)
  {
    state++;
    if (state > STATES - 1) state = 0;
    DEBUG_PRINTLN(F("State:")); 
    DEBUG_PRINTLN(state);
    lastTime += refreshInterval;
    getTempHumidity();
  }
  if (state != lastState) 
  {
    fastClear();
    lcdDisplay[state]();
  }
  lastState = state;
  if (buttonPushed)
  {
    activateScene();
  }
  if (isMessage)
  {
    if (millis() - motdTimer > 86400 * 1000UL)
    {
      isMessage = false;
    }
  }
}
void fastClear()
{
  lcd.setCursor(0,0);
  lcd.print("                ");
  lcd.setCursor(0,1);
  lcd.print("                ");
}
//
void lcdDisplay0()
{
  lcd.setCursor(0,0);
  lcd.print(F("Time: "));
  if (hourFormat12() < 10) lcd.print("0");
  lcd.print(hourFormat12());
  lcd.print(":");
  if (minute() < 10) lcd.print("0");
  lcd.print(minute());
  if (isAM()) lcd.print(F("am"));
  else lcd.print(F("pm"));
  DEBUG_PRINT(F("Time:"));
  DEBUG_PRINTLN(hourFormat12());
  lcd.setCursor(0,1);
  lcd.print(F("Date: "));
  if (month() < 10) lcd.print("0");
  lcd.print(month());
  lcd.print("/");
  if (day() < 10) lcd.print("0");
  lcd.print(day());
  lcd.print("/");
  lcd.print(year());
  DEBUG_PRINTLN(F("Date: ")); 
  DEBUG_PRINT(month()); 
  DEBUG_PRINT("/"); 
  DEBUG_PRINT(day()); 
  DEBUG_PRINT("/"); 
  DEBUG_PRINTLN(year());
}
void lcdDisplay1()
{
  lcd.setCursor(0,0);
  lcd.print(F(" Indoor Temp:"));
  lcd.print(int(round(insideTemperature)));
  lcd.print(char(223));
  DEBUG_PRINT(F("Indoor Temp:")); 
  DEBUG_PRINT(int(round(insideTemperature))); 
  DEBUG_PRINTLN(F("F"));
  lcd.setCursor(0,1);
  lcd.print("    Humidity:");
  lcd.print(int(round(humidity)));
  lcd.print(F("%"));
  DEBUG_PRINT("   Humidity:");
  DEBUG_PRINT(int(round(humidity)));
  DEBUG_PRINTLN(F("F"));
}
void lcdDisplay2()
{
  lcd.setCursor(0,0);
  lcd.print("Outdoor Temp:"); 
  lcd.print(OutdoorTemp); 
  lcd.print(char(223));
  DEBUG_PRINT(F("Outdoor Temp:"));
  DEBUG_PRINTLN(OutdoorTemp);
  lcd.setCursor(0,1);
  lcd.print(F("    Humidity:")); 
  lcd.print(OutdoorHumidity); 
  lcd.print(F("%"));
  DEBUG_PRINT(F("    Humidity:"));
  DEBUG_PRINTLN(OutdoorHumidity);
}
void lcdDisplay3()
{
  lcd.setCursor(0,0);
  lcd.print(F("Today's High:"));
  lcd.print(todayHigh); 
  lcd.print(char(223));
  DEBUG_PRINT(F("Today's High: "));
  DEBUG_PRINTLN(todayHigh);
  lcd.setCursor(0,1);
  lcd.print(F("         Low:"));
  lcd.print(todayLow); 
  lcd.print(char(223));
  DEBUG_PRINT(F("Today's Low: "));
  DEBUG_PRINTLN(todayLow);
}
void lcdDisplay4()
{
  lcd.setCursor(0,0);
  lcd.print(F("Today's Weather"));
  DEBUG_PRINTLN(F("Today's Weather: "));
  lcd.setCursor(0,1);
  lcd.print(conditions);
  DEBUG_PRINTLN(conditions);
}
void lcdDisplay5()
{
  lcd.setCursor(0,0);
  lcd.print(F("Forcast Tomorrow"));
  DEBUG_PRINTLN(F("Tomorrow's Forecast: "));
  lcd.setCursor(0,1);
  lcd.print(tomorrowWeather);
  DEBUG_PRINTLN(tomorrowWeather);
}
void lcdDisplay6()
{
  if (isMessage)
  {
    lcd.setCursor(0,0);
    lcd.print(F("**NEW  MESSAGE**"));
    DEBUG_PRINTLN(F("****Message****"));
    lcd.setCursor(0,1);
    lcd.print(messageOfTheDay);
    DEBUG_PRINTLN(messageOfTheDay);
    motdTimer = millis();
  }
  else
  {
    lcd.setCursor(0,0);
    lcd.print(F("****Welcome!****"));
    DEBUG_PRINTLN(F("****Message****"));
    lcd.setCursor(0,1);
    lcd.print(F("Have a Nice Day!"));
    DEBUG_PRINTLN(F("Have a Nice Day"));
  }
}
//
void getTempHumidity()
{
  insideTemperature = dht.toFahrenheit(dht.getTemperature());
  if (isnan(insideTemperature)) 
  {
    DEBUG_PRINTLN(F("Failed reading temperature from DHT"));
  } 
  humidity = dht.getHumidity();
  if (isnan(humidity)) 
  {
    DEBUG_PRINTLN(F("Failed reading humidity from DHT"));
  } 
}
//
void receiveTime(unsigned long time)
{
  DEBUG_PRINTLN(F("Time value received: "));
  DEBUG_PRINTLN(time);
  setTime(time);
}
//
void PushButton()
{
  static unsigned long last_interrupt_time = 0;
  unsigned long interrupt_time = millis();
  if (interrupt_time - last_interrupt_time > 200)
  {
    buttonPushed = true;
  }
  last_interrupt_time = interrupt_time;
}
//
void activateScene()
{
  DEBUG_PRINTLN(F("ButtonPushed"));
  fastClear();
  for (byte i = 0; i < 10; i++)
  {
    lcd.noBacklight();
    delay(50);
    lcd.backlight();
    delay(50);
  }
  lcd.setCursor(0,0);
  lcd.print(F(" A/C Boost Mode "));
  lcd.setCursor(0,1);
  lcd.print(F("**** ACTIVE ****"));
  delay(2000);
  buttonPushed = false;
  lastTime = millis(); //Reset the timer to even out display interval
  ledStatus = gw.loadState(CHILD_ID_LED);
  if (ledStatus > 0)
  {
    lcd.backlight();
  }
  else
  {
    lcd.noBacklight();
  }
}
//
void getVariables(const MyMessage &message)
{
  if (message.sensor == CHILD_ID_SCENE)
  { 
    if (message.type == V_VAR1)
    {
      OutdoorTemp = atoi(message.data);
      DEBUG_PRINTLN(F("OutdoorTemp recieved:"));
      DEBUG_PRINTLN(OutdoorTemp);
    }
    if (message.type == V_VAR2)
    {
      OutdoorHumidity = atoi(message.data);
      DEBUG_PRINT(F("OutdoorHumidity recieved:"));
      DEBUG_PRINTLN(OutdoorHumidity);
    }
    if (message.type == V_VAR3)
    {
      todayLow = atoi(message.data);
      DEBUG_PRINT(F("Received Today's LOW:"));
      DEBUG_PRINTLN(todayLow);
    }

    if (message.type == V_VAR4)
    {
      todayHigh = atoi(message.data);
      DEBUG_PRINT(F("Received Today's HIGH:"));
      DEBUG_PRINTLN(todayHigh);
    }
    if (message.type == V_VAR5)
    {
      String newMessage = String(message.data);
      int locator = newMessage.indexOf("@");
      newMessage = newMessage.substring(0, locator);
      conditions = newMessage;
      DEBUG_PRINT(F("Received today's Conditions:"));
      DEBUG_PRINTLN(conditions);
    }
  }
  if (message.sensor == CHILD_ID_LED)
  {
    if (message.type == V_LIGHT)
    {
      int ledState = atoi(message.data);
      if (ledState > 0)
      {
        lcd.backlight();
      }
      else
      {
        lcd.noBacklight();
      }
    }
    if (message.type == V_VAR1)
    {
      // led briteness (nice idea!!!!)
    }
    if (message.type == V_VAR2)
    {
      // Extended Forecast
      String newMessage = String(message.data);
      int locator = newMessage.indexOf("@");
      newMessage = newMessage.substring(0, locator);
      tomorrowWeather = newMessage;
      DEBUG_PRINT(F("Received Two Day Forecast:"));
      DEBUG_PRINTLN(tomorrowWeather);
    }
    if (message.type == V_VAR3)
    {
      // message of the day
      String newMessage = String(message.data);
      int locator = newMessage.indexOf("@");
      newMessage = newMessage.substring(0, locator);
      messageOfTheDay = newMessage;
      DEBUG_PRINT(F("Received Message of the Day:"));
      DEBUG_PRINTLN(messageOfTheDay);
      isMessage = true;
    }
  }
}

fixed it

[korttoma]

4 spaces in front of every line will be displayed as code. Please update your post. And I could not play the videos either.

[BulldogLowell]

@korttoma

all fixed. I had to take the text into another editor

here is the lua

 local temp = luup.variable_get("urn:upnp-org:serviceId:TemperatureSensor1","CurrentTemperature", 60)
 luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;3", variableId="VAR_1", value=temp}, 85)

 luup.sleep(750)

 local humid = luup.variable_get("urn:micasaverde-com:serviceId:HumiditySensor1","CurrentLevel", 63)
 luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;3", variableId="VAR_2", value=humid}, 85)

 luup.sleep(750)

 local low = luup.variable_get("urn:upnp-org:serviceId:TemperatureSensor1","CurrentTemperature", 61)
 luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;3", variableId="VAR_3", value=low}, 85)

 luup.sleep(750)

 local high = luup.variable_get("urn:upnp-org:serviceId:TemperatureSensor1","CurrentTemperature", 62)
 luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;3", variableId="VAR_4", value=high}, 85)

 luup.sleep(750)

 local conditions = luup.variable_get("urn:upnp-micasaverde-com:serviceId:Weather1","Condition", 59)
 luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;3", variableId="VAR_5", value=conditions}, 85)

 luup.sleep(750)  

 local conditions = luup.variable_get("urn:upnp-micasaverde-com:serviceId:Weather1","Forecast.1.Condition", 59)
 luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;4", variableId="VAR_2", value=conditions}, 85)

 luup.sleep(750)

[korttoma]

Nice job on the sketch Jim, I especially liked the idea with "#define DEBUG". There were allso some other ideas I will be stealing some day when I find time to update my sketch.

So I guess you did not use the function by @RexBeckett then? I could not get it to work either. I'll try your suggestion with the delays.

[BulldogLowell]

@korttoma

Thanks for your help and time, you made it a lot easier! I'm trying to write the code for an audience rather than myself so I'm focused more on what I'm putting into the sketch versus just 'getting it to work.' I'm going to get that led dimming next!

I messed around with the function but lost patience with it,,. I'll get my lua book out and tackle that one rainy day. Meanwhile, I have been using these delays without any issues (no Vera re-starts) and can probably work on shortening the delay times now that I have my Ethernet gateway working so well!!!

best network performance ever for me since I started with MySensors :)

I keep looking at your scene controller (and the one Henrik did) and I guess I just have to pick one to make!!

[korttoma]

It was all my pleasure Jim, it is nice to have someone to exchange ideas with. I take it you mean the dimming of the backlight right? Let me know if you need some details.

I have also put together a Ethernet GW some time ago but newer got around to take it in to use. And then there was all this about the SPI issue so I guess I need to take it on again at some point. A bit unclear if it will work with the Ethernet board I have anyway.

[BulldogLowell]

@korttoma

yeah, I meant dimming the LED backlight, a nice touch to your project.

your ethernet board uses the same Wiznet chipset, so you may want to try what was posted on the other thread. I got frustrated with my Serial gateway losing its communication with Vera.

[cleight]

Hello, I am building this same thing and have used the sketch and luup code above thanks to @BulldogLowell & @korttoma!

I am having issues though pulling a variable to send to the lcd screen via luup. I put this device under the Light Variable 4 code is at the bottom of the Lua below. This device is another mysensor that is visible in Vera so I am not sure what is wrong, any help someone could provide would be great.

Luup code:

local temp = luup.variable_get("urn:upnp-org:serviceId:TemperatureSensor1","CurrentTemperature", 7)
luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;3", variableId="VAR_1", value=temp}, 103)
luup.sleep(750)
local humid = luup.variable_get("urn:micasaverde-com:serviceId:HumiditySensor1","CurrentLevel", 10)
luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;3", variableId="VAR_2", value=humid}, 103)
luup.sleep(750)
local low = luup.variable_get("urn:upnp-org:serviceId:TemperatureSensor1","CurrentTemperature", 61)
    luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;3", variableId="VAR_3", value=low}, 103)
 luup.sleep(750)
local high = luup.variable_get("urn:upnp-org:serviceId:TemperatureSensor1","CurrentTemperature", 62)
luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;3", variableId="VAR_4", value=high}, 103)
luup.sleep(750)
local conditions = luup.variable_get("urn:upnp-micasaverde-com:serviceId:Weather1","Condition", 6)
luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;3", variableId="VAR_5", value=conditions}, 103)
luup.sleep(750)  
local conditions = luup.variable_get("urn:upnp-micasaverde-com:serviceId:Weather1","Forecast.1.Condition", 59)
luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;4", variableId="VAR_2", value=conditions}, 103)
 luup.sleep(750)
  local conditions = luup.variable_get("urn:upnp-micasaverde-com:serviceId:TemperatureSensor1","CurrentTemperature", 98)
 luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;4", variableId="VAR_4", value=HTTemp}, 103)
  luup.sleep(750)

Sketch: weather_station.ino

[BulldogLowell]

@cleight said:

local conditions = luup.variable_get("urn:upnp-micasaverde-com:serviceId:TemperatureSensor1","CurrentTemperature", 98)
luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;4", variableId="VAR_4", value=HTTemp}, 103)
luup.sleep(750)

it looks like you are making a call for the variable "conditions" and passing "HTTemp" in the two last commands. here:

local conditions = luup.variable_get("urn:upnp-micasaverde-com:serviceId:TemperatureSensor1","CurrentTemperature", 98) -- you get "conditions"

luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;4", variableId="VAR_4", value=HTTemp}, 103) -- you set "HTTemp"

luup.sleep(750)

that could be it...

[cleight]

@BulldogLowell I was under the impression that the value could be named what ever you want, is that not the case? changing the value to temp should fix the issue you think?

[BulldogLowell]

@cleight said:

changing the value to temp should fix the issue you think?

now I am confused.

You are (it seems to me) retreiving a value from device 98, no?

You are then writing that to device 103, at VAR_4... yes?

please clarify for me.

(reference the snippet of code in my last post)

[cleight]

@BulldogLowell Thanks for pointing that out, I actually need to write VAR4 to device 105. I have made the necessary changes but still isn't working.

 local temp = luup.variable_get("urn:upnp-   org:serviceId:TemperatureSensor1","CurrentTemperature", 7)
 luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1",  "SendCommand", {radioId="11;3", variableId="VAR_1", value=temp}, 103)
luup.sleep(750)
local humid = luup.variable_get("urn:micasaverde-com:serviceId:HumiditySensor1","CurrentLevel", 10)
luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;3", variableId="VAR_2", value=humid}, 103)
 luup.sleep(750)
 local low = luup.variable_get("urn:upnp-org:serviceId:TemperatureSensor1","CurrentTemperature", 8)
 luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;3", variableId="VAR_3", value=low}, 103)
 luup.sleep(750)
 local high = luup.variable_get("urn:upnp-org:serviceId:TemperatureSensor1","CurrentTemperature", 9)
 luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;3", variableId="VAR_4", value=high}, 103)
 luup.sleep(750)
 local conditions = luup.variable_get("urn:upnp-micasaverde-com:serviceId:Weather1","Condition", 6)
 luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;3", variableId="VAR_5", value=conditions}, 103)
 luup.sleep(750)  
 local conditions = luup.variable_get("urn:upnp-micasaverde-com:serviceId:Weather1","Forecast.1.Condition", 6)
 luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;4", variableId="VAR_2", value=conditions}, 105)
  luup.sleep(750)
  local temp = luup.variable_get("urn:upnp-micasaverde-com:serviceId:TemperatureSensor1","CurrentTemperature", 98)
  luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;4", variableId="VAR_4", value=HTTemp}, 105)
  luup.sleep(750)

[korttoma]

You are stil not giving HTtemp any value!

[cleight]

@korttoma Can you elaborate on HTTemp not getting any value? I am not following what HTTemp should be either changed to or how to give it value.

Here is a snippet of the debug window:
Indoor Temp:20F
Hot Tub:0Fsend: 11-11-0-0 s=255,c=3,t=1,pt=0,l=0,st=ok:
read: 0-0-11 s=255,c=3,t=1,pt=0,l=10:1423665003
Time value received:
1423665003

[korttoma]

Try replacing the last section with this:

local HTTemp = luup.variable_get("urn:upnp-micasaverde-com:serviceId:TemperatureSensor1","CurrentTemperature", 98)
luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;4", variableId="VAR_4", value=HTTemp}, 105)
luup.sleep(750)

[cleight]

@korttoma said:

local HTTemp = luup.variable_get("urn:upnp-micasaverde-com:serviceId:TemperatureSensor1","CurrentTemperature", 98)
luup.call_action("urn:upnp-arduino-cc:serviceId:arduino1", "SendCommand", {radioId="11;4", variableId="VAR_4", value=HTTemp}, 105)

I tried this luup code and get the same results, at this point I have to believe it is an issue in my sketch as I have pushed a known working device to 105, VAR_4 and it isn't working either.

[BulldogLowell]

@cleight

check your return with the equivalent http command in this format in your browser:

http://ip_address:3480/data_request?id=variableget&DeviceNum=98&serviceId=urn:upnp-micasaverde-com:serviceId:TemperatureSensor1&Variable=CurrentTemperature

just replace ip_address with your vera's IP address...

look here

[cleight]

@BulldogLowell Thanks for this information this helped me to get the variables I needed to pull the alarm status, I also fixed the above issue with not being able to pull the Temperature from the device I was trying to. Once I tweak my code and adjust the display the way I like I will post the final sketch and a video.

One more thing how easy would it be to have semi-static data, like the temp or time in one corner of the screen while it is cycling through all the screens?

[BulldogLowell]

@cleight

like this?

link text