MYSBootloader starting without gateway
-
I see how the bootloader will give control to the main sketch when it does not get response from the controller about a new FW, e.g. MYSController not running and no controller answering FW related messages.
My nodes are all running in some configuration where they boot up even with no gateway link stablished, i.e. I use the setting#define MY_TRANSPORT_WAIT_READY_MS 3000However once I changed the bootloader this makes no sense anymore as the bootloader will never give control to sketch.
@tekka or sb can help me figure this out?
Thanks
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login