Sensor + Interrupt questions
-
I have a similar (same?) sensor type running on a Pro mini.
I uses a PNP to gain up the sensor current and ran it into INT1 . My RFM69 uses INTO.Works perfect. I've been running it on 3 AAA *** Carbon! batteries for a few months to see how long the batteries work. I can't yet estimate the battery life because I'm using the internal measurement of Vcc (which goes through the regulator).
John
*** updated, the original post stated 2 AAA batteries. This was in error.
-
nice :)
I ordered a couple of sensors yesterday so as soon as they come in ill start doing some testing with them.
-
I have a similar (same?) sensor type running on a Pro mini.
I uses a PNP to gain up the sensor current and ran it into INT1 . My RFM69 uses INTO.Works perfect. I've been running it on 3 AAA *** Carbon! batteries for a few months to see how long the batteries work. I can't yet estimate the battery life because I'm using the internal measurement of Vcc (which goes through the regulator).
John
*** updated, the original post stated 2 AAA batteries. This was in error.
-
@CrankyCoder
For sensors I'm using 4 stainless steel screws extending out the bottom of a plastic housing. They are spaced at the corners of a 5/8 square. I tested it with 2 screw and it worked fine but I went with 4 for the extra sense current.@gohan,
I'm using 3 AAA batteries, my 2 AAA carbon battery statement was in error. When fresh the voltage exceeds the RFM69 input voltage specification.John
-
Hi CrankyCoder,
I have door/window sensors running using interruptions. I got rid of the regulator and the power led and I am using a step up converter to take as much juice as possible from the batteries. The oldest node has been running for a year already on 2 AA batteries so your project is definitely doable.
The problem could be in case the leak sensor throws a lot of false positives in which case it would drain the battery quicker.
I hope it helps.
--
David
[http://www.smarthomeblog.net] -
Hi CrankyCoder,
I have door/window sensors running using interruptions. I got rid of the regulator and the power led and I am using a step up converter to take as much juice as possible from the batteries. The oldest node has been running for a year already on 2 AA batteries so your project is definitely doable.
The problem could be in case the leak sensor throws a lot of false positives in which case it would drain the battery quicker.
I hope it helps.
--
David
[http://www.smarthomeblog.net]@david-cabañero Thanks David, i just got a few of the step ups so I will give that a shot. Because of some of my other projects I have TONS of 18650 cells laying around so I figure those are decent batteries for this.
-
no, i have a couple that i am running at 3.3 off the 18650s. so far it's been pretty good just using the sleep
-
Hi @CrankyCoder ,
I think that 18650 will have plenty of juice for a project like this one.
Do you have an idea on how much does the water sensor consume in sleep mode? I am curious and I might actually go for the same project.
Which one are you using?
-
not sure about in sleep mode. But here is the sensor i am using.
https://smile.amazon.com/gp/product/B00Q9YBIJI/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login