iobroker don't find my sensor



  • Hey guys

    I have added the serial Gateway over USB to the iobroker. The interface dont found the modul serial. i have installed by npm.

    Logfile by Serial Monitor

    9;1;1;0;26;0
    0;255;3;0;9;1316211 TSF:MSG:READ,9-9-0,s=1,c=1,t=27,pt=0,l=1,sg=0:0
    9;1;1;0;27;0
    0;255;3;0;9;1316235 TSF:MSG:READ,9-9-0,s=1,c=1,t=28,pt=0,l=1,sg=0:0
    9;1;1;0;28;0
    0;255;3;0;9;1316838 TSF:MSG:READ,9-9-0,s=1,c=1,t=24,pt=0,l=1,sg=0:1
    9;1;1;0;24;1
    0;255;3;0;9;1316861 TSF:MSG:READ,9-9-0,s=1,c=1,t=25,pt=0,l=1,sg=0:1
    9;1;1;0;25;1
    0;255;3;0;9;1316885 TSF:MSG:READ,9-9-0,s=1,c=1,t=26,pt=0,l=1,sg=0:0
    9;1;1;0;26;0
    0;255;3;0;9;1316909 TSF:MSG:READ,9-9-0,s=1,c=1,t=27,pt=0,l=1,sg=0:0
    9;1;1;0;27;0
    0;255;3;0;9;1316932 TSF:MSG:READ,9-9-0,s=1,c=1,t=28,pt=0,l=1,sg=0:0
    9;1;1;0;28;0
    

    Error log by iobroker:

    
    mysensors.0	2018-07-23 19:25:33.188	debug	Log :1200020 TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=20,pt=0,l=0,sg=0,ft=0,st=OK:
    mysensors.0	2018-07-23 19:25:33.188	debug	Message type: internal
    mysensors.0	2018-07-23 19:25:33.187	debug	Got: {"id":"0","childId":"255","type":"internal","ack":false,"payload":"1200020 TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=20,pt=0,l=0,sg=0,ft=0,st=OK:","subType":"I_LOG_MESSAGE"}
    mysensors.0	2018-07-23 19:25:33.186	debug	Serial data received: 0;255;3;0;9;1200020 TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=20,pt=0,l=0,sg=0,ft=0,st=OK:
    mysensors.0	2018-07-23 19:25:33.164	debug	Log :1200001 TSM:READY:NWD REQ
    mysensors.0	2018-07-23 19:25:33.164	debug	Message type: internal
    mysensors.0	2018-07-23 19:25:33.163	debug	Got: {"id":"0","childId":"255","type":"internal","ack":false,"payload":"1200001 TSM:READY:NWD REQ","subType":"I_LOG_MESSAGE"}
    mysensors.0	2018-07-23 19:25:33.162	debug	Serial data received: 0;255;3;0;9;1200001 TSM:READY:NWD REQ
    

Log in to reply
 

Suggested Topics

  • 4
  • 8
  • 5
  • 1
  • 2
  • 20

2
Online

11.2k
Users

11.1k
Topics

112.5k
Posts