Thank you @jkandasa . I am now able to get the webserver running and access the mycontroller.org web page.

Can you provide some guidance on how to set up the serial gateway? I have checked the support document and it doesn't answer the following questions:
How do I choose which one of the four drivers?
What are the criteria around setting the port name? I know the USB device has set up as COM 5. I am not sure what the example "/dev/ttyUSB0" indicates.
Baud rate and frequency should be OK at the suggested default values, I think

Thanks!

Thank you @jkandasa . I am now able to get the webserver running and access the mycontroller.org web page.

Can you provide some guidance on how to set up the serial gateway? I have checked the support document and it doesn't answer the following questions:
How do I choose which one of the four drivers?
What are the criteria around setting the port name? I know the USB device has set up as COM 5. I am not sure what the example "/dev/ttyUSB0" indicates.
Baud rate and frequency should be OK at the suggested default values, I think

Thanks!

Thanks for the quick response!
I have upgraded to Java 1.8. The command start.bat file ran and then left the terminal window open. I did not see any errors in the log file. It appears the server was running. But no web page launched. Do I need to select a file to launch the web page, or should it launch automatically?

One other note is sometimes the temp file does not want to be created, the log file says "cannot create at this location". Where do you suggest creating the temp file? Is it OK to create it in the MySensor folder?

I went ahead and downloaded and installed 0.0.3.Alpha2 as you suggested. It appears to be a step backwards as the terminal window does not open any more and the log file has stopped being created.

Sorry for all the questions, I am quite new to this and trying to get up to speed as quickly as I can. I am running Win10 on this PC. Will that impact any of the operation?

Thanks for your help! Les

Re: Help with Windows Installation
I have read and reread the installation instructions and still cannot figure out how to get the Mycontroller server to activate and launch. I have unpacked Release 0.0.3 alpha 1 here: C:\Program Files (x86)\MyController.
When I go to the MyController properties file there are no parameters for the serial connection.
When I double click the "start" batch file, a terminal window opens for a split second, then closes.
Any help with the set up would be very appreciated. Thank you