@mfalkvidd : Thats correct, but im working on a pin assignment (for STM32 and) ESP32... Mybe its a goot idea to open o new thread for that...

Thanks ! -but you cant see other projects there than Homematic oder Zigbee Devices... They are actually only in my github repos... https://github.com/ranseyer?tab=repositories

Thanks ! -but you cant see other projects there than Homematic oder Zigbee Devices... They are actually only in my github repos... https://github.com/ranseyer?tab=repositories

I had no time for testing my designs, but if the is someboby from europe interested it will raise my motivation:
(And i could share some PCBs of them)

https://github.com/ranseyer/Zigbee-Devices

for CC2530:
-8 Key Remote
-Test/Dev Board
(-Cc2538 coordionator)

Thank you for sharing this very cool project.

I watch this too...

@mfalkvidd : Thats correct, but im working on a pin assignment (for STM32 and) ESP32... Mybe its a goot idea to open o new thread for that...

Hi Scalz,

is it possible that you share the schematic ? Im Interestet mostly which Pins you uses to the "? mysX ?" Connector...
Greetings

Hi @MGHaff , is it possible that you share the latest Code ?

Thanks in advance...

Very nice. Thanks for Sharing!

Thanks for sharing. Is it possible that you post the schematic, and is it now useable with mysensors ?

Hi, i have a Gateway running and the motion-sensor. The Sensors talks with the Gateway. (Arduino Pins: D2,D8,D9)
Now i have to switch to another Hardware. On the Arduino-Pro Mini i have easy access to 0-RX, 1-TX, 2-D5, 3-D5, 4-D7, 10-13, A1-A3)
Which combination of this pins would be the best, and how can i define it in the sketch ?
Im happe for each hint.