it is possible to make so NRF24L01+ -> ESP8266 instead of (WIZNET (W5100) ETHERNET MODULE and ENC28J60 ETHERNET MODULE)
Timurufa
@Timurufa
Best posts made by Timurufa
Latest posts made by Timurufa
-
WiFi MQTTGateway
-
own sensors and devices
Hi, firends!!
I constructed a recuperator, automated control by means of nano (it completely works independently (taking temperature, efficiency, regulates speeds of influx and outflow)) but it has three operation modes: Auto Manual Is also switched off!
The task following as to me to read out temperature from sensors (4 pieces) to switch the modes, and to read out different statuses (on and off) of units. I should connect it to the principal controler on means of mysensor library nRF24 (whether it is possible to create in this library the device (same as the dimer or the sensor of a rain or light)) -
RE: nRF24LE1 full controller to control devices and sensors reading!!
As the creator of idea promised, he will make the designer especially for mysensors... if it embodies ideas at least of the elementary sensors and switches, it is enough. Idea to umeslit everything in one le1 to benefit battery life and the size, for example to build in the standard switch of ringing type for switching on or a dimmirovaniye of light in the room or generally the miniature long-living temperature sensor or movements
-
RE: nRF24LE1 full controller to control devices and sensors reading!!
went development of the theme !! it's very good
-
RE: nRF24LE1 full controller to control devices and sensors reading!!
only of nRF24LE1 and the battery
-
RE: nRF24LE1 full controller to control devices and sensors reading!!
yes of course!
Serial Communication Examples from mysensors "12; 6; 0; 0; 3; 1.4\n"
Serial Communication Examples "1 11 1 205" - that means a command sets the PWM level on 205 on an output of 1 (p0.3). Well to 2 PWM outputs on the radio module: the second is on p0.2 and has an output number 0 (zero).
and thus the executive unit or the unit of sensors consists a tolkor of nRF24LE1 and the battery -
RE: nRF24LE1 full controller to control devices and sensors reading!!
very good project and a very convenient solution to many problems for the project Mysensors!
need help in adapting nRF24LE1 ( controller ) to the project mysensors -
nRF24LE1 full controller to control devices and sensors reading!!
nRF24LE1 full controller to control devices and sensors reading!!
there is a good Russian project with the compiler
it makes it possible to create actuators without arduino ... small size and long battery life
http://homes-smart.ru/index.php/oborudovanie/bez-provodov-2-4-ggts/nrf24le1-nrf24l01-mikrokontroller