Ok, it works. Looks like the problem was caused by windows sensors that were not connected but initialized, so they were missing.
I removed them in the MAX software and then everything was displayed correctly.
Thank you for this great project! :+1:

Hi folks,

i bought a MAX! set month ago including MAX Cube, 4 Valves and some window sensors. Now i want to use this project to be able to switch on and off gas boiler, which is operated by remote thermostat at this moment.
So far, i've got it runing, but i have a problem with room temperature reading.
I have four rooms, two are read correclty, but another two shows temperature and set temperature as 255, the Valve % seems to coresponds to other rooms somehow.

I hope this thread/project is not completely dead and somebody can help me with it ... thanks guys!

EDIT: I have resolved the relay issue described in my original post, so i removed that question. It was caused by wrong configuration in variables.txt

(sorry for my poor english)