Best posts made by bereska

bereska

@patrikr76 thank you so much. I had the same issue with my motion sensor and spent 2 days pulling my hair out)

bereska

hi again
I got it working

Insex00|⸮⸮E⸮V⸮U⸮ 
23:24:18.693 ->  __  __       ____
23:24:18.693 -> |  \/  |_   _/ ___|  ___ _ __  ___  ___  _ __ ___
23:24:18.693 -> | |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __|
23:24:18.693 -> | |  | | |_| |___| |  __/ | | \__ \  _  | |  \__ \
23:24:18.728 -> |_|  |_|\__, |____/ \___|_| |_|___/\___/|_|  |___/
23:24:18.728 ->         |___/                      2.3.0
23:24:18.728 -> 
23:24:18.728 -> 16 MCO:BGN:INIT NODE,CP=RNNNA---,VER=2.3.0
23:24:18.728 -> 25 TSM:INIT
23:24:18.728 -> 26 TSF:WUR:MS=0
23:24:18.728 -> 33 TSM:INIT:TSP OK
23:24:18.728 -> 35 TSM:INIT:STATID=22
23:24:18.728 -> 37 TSF:SID:OK,ID=22
23:24:18.728 -> 39 TSM:FPAR
75 TSF:MSG:SEND,22-22-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
880 TSF:MSG:READ,0-0-22,s=255,c=3,t=8,pt=1,l=1,sg=0:0
23:24:19.581 -> 885 TSF:MSG:FPAR OK,ID=0,D=1
2082 TSM:FPAR:OK
23:24:20.765 -> 2083 TSM:ID
23:24:20.765 -> 2084 TSM:ID:OK
23:24:20.800 -> 2086 TSM:UPL
23:24:20.800 -> 2089 TSF:MSG:SEND,22-22-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1
23:24:20.800 -> 2096 TSF:MSG:READ,0-0-22,s=255,c=3,t=25,pt=1,l=1,sg=0:1
23:24:20.800 -> 2101 TSF:MSG:PONG RECV,HP=1
23:24:20.800 -> 2104 TSM:UPL:OK
23:24:20.800 -> 2105 TSM:READY:ID=22,PAR=0,DIS=1
23:24:20.800 -> 2110 TSF:MSG:SEND,22-22-0-0,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=OK:0100
23:24:20.800 -> 2116 TSF:MSG:READ,0-0-22,s=255,c=3,t=15,pt=6,l=2,sg=0:0100
23:24:20.833 -> 2126 TSF:MSG:SEND,22-22-0-0,s=255,c=0,t=17,pt=0,l=5,sg=0,ft=0,st=OK:2.3.0
23:24:20.833 -> 2135 TSF:MSG:SEND,22-22-0-0,s=255,c=3,t=6,pt=1,l=1,sg=0,ft=0,st=OK:0
4142 TSF:MSG:SEND,22-22-0-0,s=255,c=3,t=11,pt=0,l=5,sg=0,ft=0,st=OK:DHT22
23:24:22.854 -> 4151 TSF:MSG:SEND,22-22-0-0,s=255,c=3,t=12,pt=0,l=3,sg=0,ft=0,st=OK:1.0
23:24:22.854 -> 4159 TSF:MSG:SEND,22-22-0-0,s=1,c=0,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
23:24:22.854 -> 4166 TSF:MSG:SEND,22-22-0-0,s=0,c=0,t=6,pt=0,l=0,sg=0,ft=0,st=OK:
23:24:22.854 -> 4172 MCO:REG:REQ
23:24:22.854 -> 4176 TSF:MSG:SEND,22-22-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=OK:2
23:24:22.890 -> 4183 TSF:MSG:READ,0-0-22,s=255,c=3,t=27,pt=1,l=1,sg=0:1
23:24:22.890 -> 4188 MCO:PIM:NODE REG=1
23:24:22.890 -> 4190 MCO:BGN:STP
6192 MCO:SLP:MS=2000,SMS=0,I1=255,M1=255,I2=255,M2=255
23:24:24.891 -> 6197 TSF:TDI:TSL
6199 MCO:SLP:WUP=-1
23:24:27.107 -> 6200 TSF:TRI:TSB
6207 MCO:BGN:INIT OK,TSP=1
23:24:27.142 -> Failed reading temperature from DHT!
23:24:27.142 -> Failed reading humidity from DHT
16218 TSF:MSG:SEND,22-22-0-0,s=0,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:24.9
23:24:37.137 -> T: 24.90
23:24:37.137 -> 16227 TSF:MSG:SEND,22-22-0-0,s=1,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:51.7
23:24:37.137 -> H: 51.70
26242 TSF:MSG:SEND,22-22-0-0,s=0,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:24.8
23:24:47.138 -> T: 24.80
23:24:47.138 -> 26251 TSF:MSG:SEND,22-22-0-0,s=1,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:51.9
23:24:47.138 -> H: 51.90
rt Code Here

but the sensor fails to show up in home assistant dashboard(
afrter restarting homeassistant I found this in homeassistant log:

018-11-06 05:40:14 INFO (MainThread) [mysensors] Stopping gateway

Config directory: /config

starting version 3.2.5

2018-11-06 05:40:34 INFO (MainThread) [homeassistant.loader] Loaded websocket_api from homeassistant.components.websocket_api

2018-11-06 05:40:34 INFO (MainThread) [homeassistant.bootstrap] Home Assistant core initialized

2018-11-06 05:40:34 INFO (MainThread) [homeassistant.loader] Loaded history from homeassistant.components.history

2018-11-06 05:40:34 INFO (MainThread) [homeassistant.loader] Loaded recorder from homeassistant.components.recorder

2018-11-06 05:40:34 INFO (MainThread) [homeassistant.loader] Loaded http from homeassistant.components.http

2018-11-06 05:40:34 INFO (MainThread) [homeassistant.loader] Loaded mqtt from homeassistant.components.mqtt

2018-11-06 05:40:34 INFO (MainThread) [homeassistant.setup] Setting up mqtt

2018-11-06 05:40:34 INFO (MainThread) [homeassistant.setup] Setup of domain mqtt took 0.0 seconds.

2018-11-06 05:40:34 INFO (MainThread) [homeassistant.loader] Loaded logger from homeassistant.components.logger

2018-11-06 05:40:34 INFO (MainThread) [homeassistant.setup] Setting up logger

2018-11-06 05:40:34 ERROR (MainThread) [homeassistant.components.mqtt] Failed to connect due to exception: [Errno 111] Connection refused

2018-11-06 05:40:40 WARNING (MainThread) [homeassistant.components.mysensors] debug option for mysensors is deprecated. Please remove debug from your configuration file

2018-11-06 05:40:40 DEBUG (SyncWorker_0) [mysensors.persistence] Loading sensors from persistence file /config/mysensors1.pickle

2018-11-06 05:40:41 DEBUG (SyncWorker_1) [mysensors.persistence] Saving sensors to persistence file /config/mysensors1.pickle

2018-11-06 05:40:42 INFO (MainThread) [mysensors.gateway_mqtt] Setting up initial MQTT topic subscription

2018-11-06 05:40:42 DEBUG (MainThread) [mysensors.gateway_mqtt] Subscribing to: mygateway1-out/+/+/0/+/+, qos: 0

2018-11-06 05:40:42 DEBUG (MainThread) [mysensors.gateway_mqtt] Subscribing to: mygateway1-out/+/+/3/+/+, qos: 0

2018-11-06 05:40:42 DEBUG (MainThread) [mysensors.gateway_mqtt] Subscribing to: mygateway1-out/0/+/4/+/+, qos: 0

2018-11-06 05:40:42 DEBUG (MainThread) [homeassistant.components.mqtt] Subscribing to mygateway1-out/+/+/0/+/+

2018-11-06 05:40:42 DEBUG (MainThread) [homeassistant.components.mqtt] Subscribing to mygateway1-out/+/+/3/+/+

2018-11-06 05:40:42 DEBUG (MainThread) [homeassistant.components.mqtt] Subscribing to mygateway1-out/0/+/4/+/+

2018-11-06 05:40:43 ERROR (MainThread) [homeassistant.core] Error doing job: Task exception was never retrieved

Traceback (most recent call last):

  File "/usr/local/lib/python3.6/site-packages/homeassistant/components/mqtt/__init__.py", line 279, in async_subscribe

    topic, msg_callback, qos, encoding)

  File "/usr/local/lib/python3.6/site-packages/homeassistant/components/mqtt/__init__.py", line 659, in async_subscribe

    await self._async_perform_subscription(topic, qos)

  File "/usr/local/lib/python3.6/site-packages/homeassistant/components/mqtt/__init__.py", line 694, in _async_perform_subscription

    _raise_on_error(result)

  File "/usr/local/lib/python3.6/site-packages/homeassistant/components/mqtt/__init__.py", line 779, in _raise_on_error

    'Error talking to MQTT: {}'.format(mqtt.error_string(result_code)))

homeassistant.exceptions.HomeAssistantError: Error talking to MQTT: The client is not currently connected.

2018-11-06 05:40:43 ERROR (MainThread) [homeassistant.core] Error doing job: Task exception was never retrieved

Traceback (most recent call last):

  File "/usr/local/lib/python3.6/site-packages/homeassistant/components/mqtt/__init__.py", line 279, in async_subscribe

    topic, msg_callback, qos, encoding)

  File "/usr/local/lib/python3.6/site-packages/homeassistant/components/mqtt/__init__.py", line 659, in async_subscribe

    await self._async_perform_subscription(topic, qos)

  File "/usr/local/lib/python3.6/site-packages/homeassistant/components/mqtt/__init__.py", line 694, in _async_perform_subscription

    _raise_on_error(result)

  File "/usr/local/lib/python3.6/site-packages/homeassistant/components/mqtt/__init__.py", line 779, in _raise_on_error

    'Error talking to MQTT: {}'.format(mqtt.error_string(result_code)))

homeassistant.exceptions.HomeAssistantError: Error talking to MQTT: The client is not currently connected.

2018-11-06 05:40:43 ERROR (MainThread) [homeassistant.core] Error doing job: Task exception was never retrieved

Traceback (most recent call last):

  File "/usr/local/lib/python3.6/site-packages/homeassistant/components/mqtt/__init__.py", line 279, in async_subscribe

    topic, msg_callback, qos, encoding)

  File "/usr/local/lib/python3.6/site-packages/homeassistant/components/mqtt/__init__.py", line 659, in async_subscribe

    await self._async_perform_subscription(topic, qos)

  File "/usr/local/lib/python3.6/site-packages/homeassistant/components/mqtt/__init__.py", line 694, in _async_perform_subscription

    _raise_on_error(result)

  File "/usr/local/lib/python3.6/site-packages/homeassistant/components/mqtt/__init__.py", line 779, in _raise_on_error

    'Error talking to MQTT: {}'.format(mqtt.error_string(result_code)))

homeassistant.exceptions.HomeAssistantError: Error talking to MQTT: The client is not currently connected.

2018-11-06 05:40:50 ERROR (MainThread) [homeassistant.core] Timer got out of sync. Resetting

2018-11-06 05:40:54 WARNING (SyncWorker_9) [netdisco.ssdp] Error fetching description at http://192.168.1.68:49152/wps_device.xml

any help is much appreciated
thank you

bereska

Posts