He i have Nextion screen. I need show on Nextion data from I2C sensors.. I have ESP8266 devkit. Here is my sketch but this sketch no showing temp and hum on the Nextion. I need alternative wire.h. ? Thanks.

#include <ESP8266WiFi.h>
#include <BlynkSimpleEsp8266.h>
#include <SimpleTimer.h>
#include <DHT.h>

#include <Wire.h>
#include <SI7021.h>
float temp, hum;
bool SI7021_present = true;
#define I2C_SCL 12      // Barometric Pressure Sensor (BMP085)
#define I2C_SDA 13
SI7021 sensor;

#include <Nextion.h>
#include <SoftwareSerial.h>

#define DHTPIN 2 //D4
#define DHTTYPE DHT22   // DHT 22 Change this if you have a DHT11
DHT dht(DHTPIN, DHTTYPE);

// You should get Auth Token in the Blynk App.
// Go to the Project Settings (nut icon).
char auth[] = "";  // Put your Auth Token here. (see Step 3 above)

SoftwareSerial HMISerial(4,5,false,256);//RX-D1 , TX-D2
Nextion myNextion(HMISerial, 9600);

SimpleTimer timer;

void setup()
{
 Wire.begin();
  sensor.begin(SDA,SCL);
  Wire.begin(I2C_SDA, I2C_SCL);
  
  Serial.begin(9600); // See the connection status in Serial Monitor
  Blynk.begin(auth, "", ""); //insert here your SSID and password

  myNextion.init();
 
  // Setup a function to be called every second
  timer.setInterval(10000L, sendUptime);
}

void sendUptime()
{
  // You can send any value at any time.
  // Please don't send more that 10 values per second.
   //Read the Temp and Humidity from DHT
  float h = dht.readHumidity();
  float t = dht.readTemperature();
  
  Blynk.virtualWrite(12, t); // virtual pin 
  Blynk.virtualWrite(13, h); // virtual pin 


 float temperature = sensor.getCelsiusHundredths()/100;
 float humidity = sensor.getHumidityPercent();
 Blynk.virtualWrite(5, temperature); 
 Blynk.virtualWrite(6, humidity); // virtual pin


  myNextion.setComponentText("t1", String(temperature));
  myNextion.setComponentText("t2", String(humidity));
  myNextion.setComponentText("t3", String(t));
  myNextion.setComponentText("t4", String(h));
  delay(1000);

  String dim = "dim=50";         //pro podsvíceni 
  myNextion.sendCommand(dim.c_str()); //pro podsvícení

}



void loop()
{
  Blynk.run();
  timer.run();
}