Before I can do a test with the SoftSPI, I have another problem;

Before this, I worked with two Arduino NRF24L01+ 2.4GHz Wireless Transceiver Modules, And that worked (except with the ENC28J60 Ethernet shield). Now I changed one of these modules with another module "NRF24L01+PA+LNA SMA Antenna Wireless Transceiver communication module 2.4G 1100m" So the new one has an external antenna to increase the range.. The problem is that I have no more communication between these two modules... what's wrong here?? I haven't change the code

Anyone???

Hi,

I have a little project as following:

2 arduino nano's, both with a NRF24L01 module, the first one is used as a transmitter (it transmits data from an ultrasonic sensor), the second one is used as a transceiver. I have both arduino's working, and they 'communicate' well with each other.

Now I want to add a ENC28J60 Ethernet Shield to one of the Nano's, so the received values can be sent to the internet... But, When I add the shield on my nano, it goes wrong.. I don't receive any data anymore...

I connected the nano and the NRF24L01 module as follows:

3,3V & GND
SPI: pin 11, 12, 13
CS: 5
CSN: 6

I don't know what the problem is...