Posts made by cattoo

@mfalkvidd said:
Ah okey, well then ill use them with proper power and buy new pro mini´s instead. Tack

@mfalkvidd
Its a Arduino Nano (clone)

Well I have some issues with battery-power.
When ill use the Usb cable to power the sensor up, everything is working fine. But when ill use 2x1,5V battery´s it does not show up in domoticz. Im not sure if I have connected the battery correct. Its on the VIN and GND and nothing more. Is it correct?

Its driving me crazy! Could you not convert this mfalkvidd! Its better to have your sketch on the front instead of that one there is there now.

What needs to be added/edited so its converted?

So does this work with 2.0?

Ok, then ill just start to read.

So ill finally got all the "gear" and my first one is up. But ill need to know how to wire a battary and which things to remove for powersaving.

Thanks to those who replyed earlier

Hi all,
Well i need some help with the Wiring the NRF24L01+ Radio so i could use it as a Gateway.
I have the a Arduino Nano V3 (clone) and from what ill could see on the wiring scheme thats on the build section its not the same.

Could some nice person help me to get started with it