Glad to hear it's coming along. Looking forward to the details, how it's working, board availability, final script, schematics....

I found this on youtube, if you have free flowing water available this might be a great power source.

https://youtu.be/0ieFZI4-6K8

Glad to hear it's coming along. Looking forward to the details, how it's working, board availability, final script, schematics....

Any more work on the project? I really like the concept of this.

Has anyone looked at putting this on the Vera?

There are 2 boards listed the second has the following specs translated from Dutch.

Panel Mount Power Distribution Fuse Module Board.
specification:
Working voltage: AC or DC 5 ~ 32V, total current rating 40Amp.afmetingen: 150mm x 72.5mm x 29mm (W x L x H) .ingangsklemmen: pitch 7.62mm / 0.3 ", current 30A for each position, thread size 26 ~ 10 AWG, stripping length 8mm Metric M3 welded schroef.P1 output terminals: pitch 5.08mm / 0.2 ", 10A maximum current for each position, size 26 ~ 12 AWG wire, strip length 7mm, Metric M2.5 slotted screw .P2-1 to P2-10 output terminals: pitch 7.5mm / 0.295 "maximum current of 10A per position, size 26 ~ 12 AWG wire, strip length 7mm, Metric M2.5 slotted schroef.zekering holders medium Blade ATO / ATC fuse, factory-installed fuses 5Amp. fused fail indication functieFR-4 fiberglass PCB, dual copper layers.

GREAT! Thanks much. I will be implementing this very soon.

PERFECT!

Thanks.

Any update on the video?

Thanks for all the good videos you have done to date.

Richard

I think it depends on the quality of the drawing and other factors. I wouldn't discount the idea. AGiC also offers ink jet cartridges to print higher quality traces.

https://youtu.be/_xv2w2AFxl8

Paper arduino

This might be a cool way to do prototyping. OR possibly a completed (easy to build) circuits.

https://agic.cc/en