Posts made by Ksandr

Ksandr

Hello. Help to deal with the problem.
The gateway to the Raspberry Pi does not give the node address.
Radio NRF24 works fine, packets from the node come:

Jun 20 17:10:58 INFO  Starting gateway...
Jun 20 17:10:58 INFO  Protocol version - 2.3.0
Jun 20 17:10:58 DEBUG MCO:BGN:INIT GW,CP=RNNGL-Q-,VER=2.3.0
Jun 20 17:10:58 DEBUG TSF:LRT:OK
Jun 20 17:10:58 DEBUG TSM:INIT
Jun 20 17:10:58 DEBUG TSF:WUR:MS=0
Jun 20 17:10:58 DEBUG TSM:INIT:TSP OK
Jun 20 17:10:58 DEBUG TSM:INIT:GW MODE
Jun 20 17:10:58 DEBUG TSM:READY:ID=0,PAR=0,DIS=0
Jun 20 17:10:58 DEBUG MCO:REG:NOT NEEDED
Jun 20 17:10:58 DEBUG MCO:BGN:STP
Jun 20 17:10:58 DEBUG MCO:BGN:INIT OK,TSP=1
Jun 20 17:10:58 DEBUG GWT:RMQ:MQTT RECONNECT
Jun 20 17:10:58 DEBUG connected to 127.0.0.1
Jun 20 17:10:58 DEBUG GWT:RMQ:MQTT CONNECTED
Jun 20 17:10:58 DEBUG GWT:TPS:TOPIC=mysensors-out/0/255/0/0/18,MSG SENT
Jun 20 17:11:21 DEBUG TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
Jun 20 17:11:21 DEBUG TSF:MSG:BC
Jun 20 17:11:21 DEBUG TSF:MSG:FPAR REQ,ID=255
Jun 20 17:11:21 DEBUG TSF:PNG:SEND,TO=0
Jun 20 17:11:21 DEBUG TSF:CKU:OK
Jun 20 17:11:21 DEBUG TSF:MSG:GWL OK
Jun 20 17:11:22 DEBUG TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
Jun 20 17:11:23 DEBUG TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
Jun 20 17:11:23 DEBUG TSF:MSG:BC
Jun 20 17:11:23 DEBUG TSF:MSG:FPAR REQ,ID=255
Jun 20 17:11:23 DEBUG TSF:CKU:OK,FCTRL
Jun 20 17:11:23 DEBUG TSF:MSG:GWL OK
Jun 20 17:11:24 DEBUG TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
Jun 20 17:11:25 DEBUG TSF:MSG:READ,255-255-0,s=146,c=3,t=3,pt=0,l=0,sg=0:
Jun 20 17:11:25 DEBUG GWT:TPS:TOPIC=mysensors-out/255/146/3/0/3,MSG SENT
Jun 20 17:11:27 DEBUG TSF:MSG:READ,255-255-0,s=109,c=3,t=3,pt=0,l=0,sg=0:
Jun 20 17:11:27 DEBUG GWT:TPS:TOPIC=mysensors-out/255/109/3/0/3,MSG SENT
Jun 20 17:11:29 DEBUG TSF:MSG:READ,255-255-0,s=72,c=3,t=3,pt=0,l=0,sg=0:
Jun 20 17:11:29 DEBUG GWT:TPS:TOPIC=mysensors-out/255/72/3/0/3,MSG SENT
Jun 20 17:11:31 DEBUG TSF:MSG:READ,255-255-0,s=35,c=3,t=3,pt=0,l=0,sg=0:
Jun 20 17:11:31 DEBUG GWT:TPS:TOPIC=mysensors-out/255/35/3/0/3,MSG SENT

If I install a "passive node", then the data begins to be transmitted